BEARING AS 3065424 - Caterpillar

Removal Procedure
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01345395
Typical example
Loosen the nuts and adjustment screws (1) on all rocker arms.
Remove bolts (5) .
Progressively loosen bolts (3). Begin at the ends of the rocker shaft assembly and work toward the center.Note: Damage to the rocker shaft may occur if the long bolts are loosened first. To avoid distortion of the rocker shaft assembly, each bolt should be loosened by a quarter of a turn at one time. Repeat the procedure until all bolts are loosened.
Remove bolts (3) .
Remove rocker shaft assembly (2) from the cylinder head.
Place temporary identification marks on pushrods (4) and pads (6) .Note: Identification will ensure that the pushrods and pads can be reinstalled in the correct position. Do not interchange the positions of used pushrods or pads.
Remove pushrods (4) from the cylinder head. Remove pads (6) from the valve stems.