BEARING-ROD-YM 3119361 - Caterpillar

Illustration 1 g00282688
Typical example
Illustration 2 g00489813
Typical solenoid connectionsWhen the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25°C (77°F) Speed ... 7018 1517 rpm Current ... 125.5 27.5 amp Voltage ... 11 V (1) Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (2) Tighten the ground terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (3) Tighten the nut to the following torque. ... 2.25 0.25 N m (20 2 lb in) (4) Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Tighten the nut on the motor terminal to the following torque. ... 8 3 N m (71 27 lb in) (6) Tighten the nut on the motor frame terminal to the following torque. ... 8 3 N m (71 27 lb in)SolenoidCurrent draw at 12 V and 25°C (77°F) Pull-in windings ... 89 5 amp Hold-in windings ... 23 2 amp maximum