BEARING 3327425 - Caterpillar

2. Remove guide tube (2) for the oil level gauge from the side cover.3. Remove bolts (3). Remove side cover (4) from the oil pan. 4. Remove bolts (6) and locks. Remove rear oil sump tube (5) from the oil pump.5. Put floor jacks under the oil pan. Remove bolts (1) that hold the front section of the oil pan to the cylinder block.6. Remove the front section (7) of the oil pan. Weight of the front section of the oil pan is 300 lb. (136 kg). 7. Put blocks under the rear section of the oil pan. Remove bolts (8) that hold the rear section of the oil pan to the cylinder block.8. Put a floor jack next to the equalizer bar. Slide the oil pan forward on the floor jack.9. Remove the rear section of the oil pan (9). Weight of the rear section of the oil pan is 50 lb. (23 kg).Install Oil Pan
1. Put the rear section (1) of the oil pan in position on the cylinder block and the flywheel housing with a floor jack. Install the bolts that hold it. 2. Put the front section (2) of the oil pan in position on the cylinder block with a floor jack. Install the bolts that hold it. 3. Put rear oil sump tube (3) in position on the oil pump. Install bolts (4) and locks that hold it.4. Put the right side cover in position on the oil pan. Install the bolts that hold it.5. Install the guide tube for oil level gauge on the side cover.6. Fill the engine with oil to the correct level.end by: a) install crankcase guards