BEARING-TAPERED ROLLER 3658184 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     4C-9634     Stud     1    
9U-6832 Nut     1    
4K-0684 Washer     1    
6V-3175 Cylinder     1    
9U-5266 Sleeve     1    
4C-4865 Hydraulic Pump     1    
B     8B-7545     Puller Group     1    
4C-5662 Threaded Adapter     2    
9U-5343 Threaded Rod 381 mm (15 in) Long     1    
6V-8237 Washer     1    
7X-0851 Nut     1    Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Put the bucket of the machine flat on the ground.
Illustration 1 g00516792
Remove the bolt, the spacer and washer (2) from link pin (1) .
Illustration 2 g00516796
Fasten a hoist to Tooling (A). Put Tooling (A) in position on link pin (1). Fasten another hoist to link assembly (3). Use Tooling (A) to remove link pin (1) .
Repeat step 3 in order to remove the other link pin.
Illustration 3 g00516921
Place a wood block under each side of the lift arm assembly, as shown.
Remove the washer, bolt (4) and sealing plate (5) from each outer pin assembly.
Illustration 4 g00516964
Remove four bolts, washers and spacers (6) from each inner bucket pin.
Illustration 5 g00516990
Use Tooling (B) to remove lower bucket pins (7). The weight of each pin is 16 kg (35 lb).
Illustration 6 g00516992
Remove O-ring seal (8) from lower bucket pins (7) .
Illustration 7 g00518435
Fasten a hoist to bucket (9), as shown. Remove the bucket from the lift arm assembly. The weight of the bucket is 2815 kg (6200 lb).
Illustration 8 g00518457
Remove collar assemblies (10) from bucket (9) .
Illustration 9 g00518458
Remove O-ring seal (11) from collar assemblies (10) .
Remove compression ring (12) and seal ring (13) from collar assemblies (10) .