BEARING-CONNECTING ROD 3766457 - Caterpillar

Illustration 14 g06203212
(4) UP Arrow button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(16) Choose Access Level menu button group
Choose the access level of the operator that you are going to add. Press the button corresponding to one of the following choices. Press OK (5) to continue.
Standard
MasterNote: Only a Master Operator can add or delete other Master Operators as well as all Standard Operators.
The "Enter New Name" alphanumeric keypad will appear.
Illustration 15 g06203220
(5) OK button
(7) BACK button
(8) HOME button
(13) Keypad BACK button
(17) LETTER CASE CHANGE buttonNote: The name cannot be longer that eleven (11) characters.
Enter a new operator’s name by typing in the name with the alphanumeric keypad. The LETTER CASE CHANGE button (17) is used to toggle between capital letters and lower case letters.
Correct a mistyped letter by pressing the Keypad BACK button (13), then reenter the correct letter.
Press the OK button (5) to set the name.
Illustration 16 g06203227
(5) OK button
(7) BACK button
(8) HOME button
(13) Keypad BACK button
Enter the pass code by pressing the intended number buttons on the numerical keypad. The numeric pass code cannot exceed seven (7) digits, including leading zeroes.
Correct a mistyped number by pressing the Keypad BACK button (13), then reenter the correct number.
Press the OK button (5) to enter the number.
Illustration 17 g06203273
(5) OK button
(7) BACK button
(8) HOME buttonIf the pass code has been entered successfully, a message will appear in the Lower Information Banner indicating that