BEARING-SELF-ALIGNING 3896927 - Caterpillar

start by:a) remove winch control group1. Remove three bolts (2) and elbow (1) from valve. 2. Remove two O-ring seals (4) and pipe (3) from elbow. 3. Remove two O-ring seals (5) from pipe. 4. Remove oil filter housing (6) and filter from valve. 5. Remove the O-ring seal (7) from housing.6. Remove plugs from valve body. 7. Remove spring (11) and plunger (9) from valve.8. Remove valve spool (10) and spring (8) from valve.Assemble Oil Filter Bypass Valve
1. Inspect all O-ring seals and make any replacements if necessary. 2. Install plunger (1), spring (3) and plug (5) in valve body.3. Install spring (2), valve spool (4) and plug (6) in valve body. 4. Install O-ring seal (7) on housing. 5. Install a new filter (9) on valve base. Install housing (8). Tighten housing to a torque of 27 4 N m (20 5 lb.ft.). 6. Install O-ring seals (10) on pipe. Install pipe (11) in elbow (12). 7. Install two O-ring seals (13) on elbow. 8. Put the elbow assembly in position on valve body and install bolts. Tighten bolts to a torque of 55 7 N m (41 5 lb.ft.).end by:a) install winch control group