BEARING-SLV-YM 3919818 - Caterpillar

Inspect A Used Filter for Debris
Illustration 1 g00100013
The element is shown with debris.
Use a 4C-5084 Filter Cutter to cut the filter element open. Spread apart the pleats and inspect the element for metal and for other debris. An excessive amount of debris in the filter element can indicate a possible failure.Small amounts of debris may be found in the filter element. This could be caused by normal wear. Small amounts of material will be especially noticeable during the first 500 hours of operation.If metals are found in the filter element, a magnet can be used to differentiate between ferrous metals and nonferrous metals. Ferrous metals can indicate wear on steel parts and on cast iron parts. Nonferrous metals can indicate wear on aluminum or on other nonferrous parts. Consult your Caterpillar dealer in order to arrange for further analysis if an excessive amount of debris is found.Using an oil filter element that is not recommended by Caterpillar can result in larger particles in unfiltered oil. The particles could enter the lubricating system and the particles could cause severe damage to the engine, the power train, or the hydraulic system components.