BEARING 3G8052 - Caterpillar

Illustration 1 g01383684
Top view of the engine (2) Lubricate the bore of the O-ring seal lightly with the lubricant that is being sealed. (3) Torque for bolts ... 55 10 N m (41 7 lb ft)Location dimensions for the fuel line clamps are in reference to the vertical line (4). Vertical line is through the center of the number one and number four fuel pump outlets. Position (A) ... 408.19 mm (16.070 inch) Position (B) ... 374.9 mm (14.76 inch) Position (C) ... 205 7 mm (8.1 0.3 inch) Position (D) ... 190 7 mm (7.5 0.3 inch)Location dimensions for the brackets are in reference to the horizontal line (1). Horizontal line is through the center of the number one and number eight fuel pump outlets. Position (E) ... 9.4 mm (0.37 inch) Position (F) ... 47.46 mm (1.868 inch) Position (G) ... 257.32 mm (10.131 inch) Position (H) ... 211 5 mm (8.3 0.2 inch) Position (J) ... 184.3 mm (7.26 inch) Position (K) ... 60 5 mm (2.4 0.2 inch) Position (L) ... 23 3 mm (0.9 0.1 inch)
Illustration 2 g01383307
View M-M (5) Torque for the nuts ... 30 7 N m (22 5 lb ft) (6) Lubricate the bore of the O-ring seal lightly with the lubricant that is being sealed. (7) Torque for fuel injection line assemblies ... 40 7 N m (30 5 lb ft) (8) Torque for the retainers ... 48 7 N m (35 5 lb ft)
Illustration 3 g01383668
Location dimensions for the fuel line clamps are in reference to the vertical line (9). Vertical line is through the center of the number one fuel pump outlet. Position (N) ... 168 7 mm (6.6 0.3 inch) Position (P) ... 288 7 mm (11.3 0.3 inch)
Illustration 4 g01390044
Location dimensions for the fuel line clamps are in reference to the vertical line (10). Vertical line is through the center of the number four fuel pump outlet. Position (R) ... 259 3 mm (10.2 0.1 inch) Position (S) ... 47.74 mm (1.880 inch)
Failure to properly replace or install a fuel injection line clamp may lead to fuel line failure. Fuel line failure may result in a fire hazard, which may cause personal injury or death. The fuel injection line clamps must be installed per these specifications.