BEARING-NEEDLE 4259216 - Caterpillar

Illustration 20 g02279353
View looking through the window of the flywheel housing.
Lubricate the new O-ring seals and both sides of thrust washer (21) with clean engine oil. Install the O-ring seals onto the sealing plate. Position the sealing plate and thrust washer (21). Install bolts (20). Install adapter (22).Ensure that the O-ring seals remain in position on sealing plate during installation.
Illustration 21 g02278613
Illustration 22 g02748956
Position camshaft gear (19) and install bolts (18).
Tighten bolts (18) to a torque of 240 40 N m (177 30 lb ft). Tighten using the above illustrated sequence. Tighten bolts illustrated as 1 and 2 an additional 240 40 N m (177 30 lb ft).
Illustration 23 g02279036
Lubricate the new O-ring seals with clean engine oil. Install new O-ring seals and sealing plate (15). Install bolts (14). Install adapter (16).Ensure that the O-ring seals remain in position on sealing plate (15) during installation.
Illustration 24 g02279013
Illustration 25 g02748956
Position damper (13) and install bolts (12). Tighten the bolts to a torque of 240 40 N m (177 30 lb ft). Tighten using the above illustrated sequence. Tighten bolts illustrated as 1 and 2 an additional 240 40 N m (177 30 lb ft).
Illustration 26 g02278995
Position cover (11) and install bolts (10). Repeat for the other damper.
Illustration 27 g02277955
Connect tube (17).
Illustration 28 g02277933
Position bracket assembly (9) and install six bolts (8).
Illustration 29 g02277897
Position oil filter base (7) and install bolts (6).
Illustration 30 g02278954
Connect fuel hose assemblies (5).
Illustration 31 g02277433
Position brace (2) and install bolts (1).
Illustration 32 g02277480
Position brace (4) and install bolts (3).End By:
Install the Electronic Unit Injectors.
Install the Valve Mechanism Cover Base.
Install the Rear Power Take-Off (RPTO).
Install the Water Temperature Regulator Housing.
Install the Inlet Manifold.
Install the Exhaust Manifold.
Install the Fuel Pressure Regulator.
Install the Catalyst Module.