BEARING 4610041 - Caterpillar

Illustration 1 g00833616
(1) Lubricate the threads with lubricant and torque the bolt. Torque for the bolt ... 1085 110 N m (800 81 lb ft) (2) Bore of cylinder ... 88.75 - 0.30 mm (3.494 - 0.012 inch) (3) Rod assembly Outside diameter ... 38.050 0.038 mm (1.4980 0.0015 inch) Minimum thickness for plating ... 0.025 + 0.1/-0.006 mm (0.0010 + 0.0039/-0.0002 inch) (4) Lubricate the inside diameter of the crown with 4C-5592 Anti-Seize Compound . Torque for the crown ... 475 + 270 N m (350 + 200 lb ft) (5) Two 9J-9812 Bearings Outside diameter ... 71.438 - 0.013 mm (2.8125 - 0.0005 inch) Inside diameter ... 38.100 - 0.013 mm (1.5000 - 0.0005 inch) (6) Lubricate the outside diameter of the head with 4C-5592 Anti-Seize Compound . Bore of head ... 38.43 0.03 mm (1.5130 0.0012 inch) (7) Apply 4C-4032 Sealant to the wiper seal groove prior to assembly. (8) Lubricate the sealing lip slightly with the lubricant that is being sealed.