4616514 BEARING GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA4616514
461-6514
4616514
CA4616514
461-6514
4616514
Weight: 8 pounds 3 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$10.99
22 Feb 2023
CN: MOTAIN-US
LUAATT Sun Visor Repair Kit for Jeep Wrangler Jk Jku (07-17) ,4 Pack Precut Repair Tube Replacement Parts for Sun Visor Squeaking
LUAATT Suitable for Jeep Wrangler JK JKU (2007-2017 Models) || Say no to the Rattling visor.Let's fix sagging and annoying visors together! || A repair kit must be a better option than spending more than 100 to repair the visor || A transverse groove have be cut on each tube in advance. It is not necessary to remove the pin when replacing it, just cut the old tube with a knife and put the new tube on the pin.This is an innovative installation method, which can be easily replaced by even 10-year-old girls || Including 2 pairs of 4 pieces
LUAATT Suitable for Jeep Wrangler JK JKU (2007-2017 Models) || Say no to the Rattling visor.Let's fix sagging and annoying visors together! || A repair kit must be a better option than spending more than 100 to repair the visor || A transverse groove have be cut on each tube in advance. It is not necessary to remove the pin when replacing it, just cut the old tube with a knife and put the new tube on the pin.This is an innovative installation method, which can be easily replaced by even 10-year-old girls || Including 2 pairs of 4 pieces
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 180-0186 Removal Tool 1
ZZ 6V-9508 Face Seal Plug 3
6V-9829 Cap As 3
6V-9510 Face Seal Plug 1
6V-9831 Cap As 1 Start By:
Remove the left side engine guard. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install". Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Illustration 1 g00947462
Shut off the fuel shutoff valve.
Loosen clamps (5) and disconnect hose (7).
Remove bolts (1), (3), and (6).
Remove bracket (2) and manifold (4), and disconnect harness assembly (6A).
Illustration 2 g00941464
Remove nut (8), spacer (9), clamps (11), and chain (10).
Illustration 3 g00942058
Remove bolts (12) and (12A).
Position tube assembly (13) out of the way. Remove the gasket from tube assembly (13).
Illustration 4 g00941466
Disconnect harness assembly (17) and remove clamp (18).
Disconnect tube assembly (16) from unit injector hydraulic pump (15).
Disconnect tube assembly (14).
Illustration 5 g00941467
Use Tooling (A) in order to disconnect hose assembly (22).
Disconnect harness assembly (20) and tube assembly (23). Remove cable strap (21) and bolts (19).
Remove unit injector hydraulic pump (15). Refer to illustration 5.
Illustration 6 g00941468
Remove O-ring seal (24), bolt (25), washer (26), and gear (27).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 180-0186 Removal Tool 1
ZZ 6V-9508 Face Seal Plug 3
6V-9829 Cap As 3
6V-9510 Face Seal Plug 1
6V-9831 Cap As 1 Start By:
Remove the left side engine guard. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install". Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Illustration 1 g00947462
Shut off the fuel shutoff valve.
Loosen clamps (5) and disconnect hose (7).
Remove bolts (1), (3), and (6).
Remove bracket (2) and manifold (4), and disconnect harness assembly (6A).
Illustration 2 g00941464
Remove nut (8), spacer (9), clamps (11), and chain (10).
Illustration 3 g00942058
Remove bolts (12) and (12A).
Position tube assembly (13) out of the way. Remove the gasket from tube assembly (13).
Illustration 4 g00941466
Disconnect harness assembly (17) and remove clamp (18).
Disconnect tube assembly (16) from unit injector hydraulic pump (15).
Disconnect tube assembly (14).
Illustration 5 g00941467
Use Tooling (A) in order to disconnect hose assembly (22).
Disconnect harness assembly (20) and tube assembly (23). Remove cable strap (21) and bolts (19).
Remove unit injector hydraulic pump (15). Refer to illustration 5.
Illustration 6 g00941468
Remove O-ring seal (24), bolt (25), washer (26), and gear (27).
Parts bearing Caterpillar catalog:
4616513
BEARING GP
Caterpillar
Caterpillar
4615654
BEARING-
Caterpillar
Caterpillar
4610041
BEARING
Caterpillar
Caterpillar
4610040
BEARING
Caterpillar
Caterpillar
4610037
BEARING
Caterpillar
Caterpillar
4610036
BEARING
Caterpillar
Caterpillar
4620992
BEARING GP
Caterpillar
Caterpillar
4620987
BEARING GP
Caterpillar
Caterpillar
4620986
BEARING GP
Caterpillar
Caterpillar
4620409
BEARING-ROLLER
Caterpillar
Caterpillar
Caterpillar
4620407
BEARING-ROLLER
Caterpillar
Caterpillar