BEARING-SLEEVE 4711967 - Caterpillar

Illustration 1 g06081948
Disconnect hose assemblies (1).
Illustration 2 g06082737
Attach a suitable lifting device to cylinder (2). The weight of cylinder (2) is approximately 68 kg (150 lb).
Illustration 3 g06082742
Remove pins (3) and Remove cylinder (2).Disassembly and Assembly Information
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-4032 Bearing Mount Compound
B 4C-6724 Socket 1
C 6V-3160 Double Acting Cylinder 1
9U-6600 Hand Hydraulic Pump 1
1P-1832 Bearing Puller Adapter 1
9S-5565 Pin Puller Sleeve As 1
4C-9633 Puller Stud 1
1P-0544 Fast Runner Nut Assembly 1
5P-8250 Washer 1
D 127-4904 Hydraulic Cylinder Repair Stand 1
E 9U-7868 Spanner Wrench 1
127-8064 Adapter Plate 1
F 195-4609 Seal Pick 1
G 452-6006 Molybdenum Grease 1
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 4 g00984798 (1) Use Tooling (B) to install bolt (1). Torque for bolt with lubrication on threads ... 1800 200 N m (1327 147 lb ft) (2) Apply clean grease to the threads. Torque for the crown ... 600 130 N m (443 95 lb ft)
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Note: Threaded rods cannot be used with hydraulic cylinders as tooling. (3) Apply Tooling (A) to the wiper seal groove prior to assembly.Use the lubricant that is being sealed to lubricate the sealing lips in the head.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
G 452-6006 Molybdenum Grease 1
Illustration 5 g06082742
Use a suitable lifting device to position cylinder (2). Install pins (3).
Illustration 6 g06081948
Install hose assemblies (1).