4711981 BEARING-SLEEVE Caterpillar parts
Rating:
Alternative (cross code) number:
CA4711981
471-1981
4711981
CA4711981
471-1981
4711981
Weight: 27 pounds 12 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Global Parts Distributors - HD Evaporator (4711981)
Global Parts Distributors
Global Parts Distributors
Information:
Test For A Short Circuit
Table 1
Troubleshooting Test Steps Values Results
1. Identify Short Circuit.
A. Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
B. Turn the key start switch and the disconnect switch to OFF.
C. Disconnect the component and the ECM from the wiring harness.
D. At the machine harness connector for the ECM, place one of the multimeter probes on the contact of the suspect wire.
E. Use the other multimeter probe to check the resistance across all other contacts in the connectors of the ECM and frame ground.
The resistance is greater than 5K Ω for all the readings. OK: The harness circuits are correct.
STOP.
NOT OK: The resistance is less than 5 Ω. There is a short in the machine harness. The short is between the suspected wire and the wire with the lowest resistance measurement.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω indicates a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω indicates an open in the circuit.
STOP.
Table 1
Troubleshooting Test Steps Values Results
1. Identify Short Circuit.
A. Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
B. Turn the key start switch and the disconnect switch to OFF.
C. Disconnect the component and the ECM from the wiring harness.
D. At the machine harness connector for the ECM, place one of the multimeter probes on the contact of the suspect wire.
E. Use the other multimeter probe to check the resistance across all other contacts in the connectors of the ECM and frame ground.
The resistance is greater than 5K Ω for all the readings. OK: The harness circuits are correct.
STOP.
NOT OK: The resistance is less than 5 Ω. There is a short in the machine harness. The short is between the suspected wire and the wire with the lowest resistance measurement.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω indicates a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω indicates an open in the circuit.
STOP.
Parts bearing Caterpillar catalog:
4711979
BEARING-SLEEVE
Caterpillar
Caterpillar
4711977
BEARING-SLEEVE
Caterpillar
Caterpillar
4711976
BEARING-SLEEVE
Caterpillar
Caterpillar
4711975
BEARING-SLEEVE
Caterpillar
Caterpillar
4711974
BEARING-SLEEVE
Caterpillar
Caterpillar
4711973
BEARING-SLEEVE
Caterpillar
Caterpillar
4713758
BEARING AS
Caterpillar
Caterpillar
4713753
BEARING AS
Caterpillar
Caterpillar
4713748
BEARING AS
Caterpillar
Caterpillar
4712668
BEARING-BALL
Caterpillar
Caterpillar
4712667
BEARING-BALL
Caterpillar
Caterpillar
4712422
BEARING-
Caterpillar
Caterpillar