BEARING (.020" U''SIZE) 4F9416 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-4030 Thread Lock Compound -
Illustration 1 g06169610
Remove two bolts (1), two bolts (2), and two half slot clips (3).
Disconnect and remove nut sensor (5), remove nut , (6), and remove breather (7).
Peel back terminal cover (8) and over foam (4).
Illustration 2 g06169499
Remove eight bolts (9) and bolt (11).
Remove harness assembly (10).
Illustration 3 g06169518
Remove four bolts (12) and remove control group (13).
Illustration 4 g06169536
Use two people to remove the upper ECM bracket (18). The upper ECM bracket (18) weighs approximately 24 kg (53 lb).
Remove half slot clip (14) and set harnesses (16) out of the way.
Remove two bolts (15) and two bolts (17) to remove upper ECM bracket (18).
Illustration 5 g06169556
Remove one bolt (19), two bolts (21) and set clip and bracket (22) off to the side.
Remove lower ECM bracket (20).Installation Procedure
Apply Tooling (A) to four bolts (12).
Install ECM (Engine) in reverse order of removal.
Tighten nut sensor (5) to a torque of 13 3 N m (115 27 lb in).
Tighten nut (6) to a torque of 25 4 N m (221 35 lb in).
Tighten eight bolts (9) to 6 1 N m (53 9 lb in).
Tighten two connectors (1) to a torque of 6 + 1.5/ - 1 N m (53 +13/ - 9 lb in).