BEARING-SLEEVE 4K3128 - Caterpillar

"Maintenance Indicator Mode"
The Engine Control Module (ECM) records data that is related to the vehicle's maintenance. The "Maintenance Indicator Mode" parameter defines the maintenance indicators that will be displayed on the Caterpillar Electronic Technician (ET).If "Distance" is selected, all maintenance indications on Cat ET will be displayed in distance.If "Hour" is selected, all maintenance indications on Cat ET will be displayed in hours.Note: Typical maintenance indications are "PM 1", "PM 2", and "Coolant Flush/Fill". The ECM provides "PM 1" maintenance interval and last maintenance information.
Table 1
Default    Application    Alternatives    
Off     GM 530/540
Other     Manual Distance
Manual Hours
Automatic Distance
Automatic Hours    
Automatic Distance     GMT-560    "PM 1 Interval (Manual Maintenance Indicator Mode)"
The "PM 1 Interval (Manual Maintenance Indicator Mode)" parameter allows a maintenance interval to be specified by the user. This parameter must be programmed only when the maintenance indicator mode is programmed to a manual mode (distance or hours).
Table 2
"Manual Distance"    
Default    Minimum    Maximum    
24140 km (15000 miles)    
8047 km (5000 miles)    
56327 km (35000 miles)    
Table 3
"Manual Hours"    
Default    Minimum    Maximum    
250     100     750    "PM1 Engine Oil Capacity (Automatic Maintenance Indicator Mode)"
The "PM 1 Interval" can be determined by the ECM. The ECM bases the "PM 1 Interval" on fuel usage. This parameter must be programmed only when the maintenance indicator mode is programmed to an automatic mode (distance or hours). Capacity of the sump influences the maintenance interval.
Table 4
Default    Application    Minimum    Maximum    
21 L (22 qt)     GM 530/540    
19 L (20 qt)    
57 L (60 qt)    
28 L (30 qt)     GMT-560    
19 L (20 qt)    
57 L (60 qt)    
31 L (33 qt)     Other    
19 L (20 qt)    
57 L (60 qt)