4K4709 BEARING-SLEEVE Caterpillar parts
236, 236B, 246C, 246D, 252B, 252B3, 256C, 262C, 262C2, 262D, 267B, 268B, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D X...
Rating:
Alternative (cross code) number:
CA4K4709
4K-4709
4K4709
CA4K4709
4K-4709
4K4709
Weight: 0.62 pounds 0 kg.
Information:
ID
44.61
mm
OD
57.137
mm
WIDTH
37.34
mm
COMPACT TRACK LOADER, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
YNRSP 4K4709 Sleeve Bearing Fits Models 279C/289C/299C/267B/3034/3044C/3056/3056E/C3.4/C6.6 (1Pcs)
YNRSP Brand: YNRSP (Reliable Spare Parts) || Part Number: 4K4709 || Part Type: Sleeve Bearing || Weight: 0.66 lbs (0.3 kg) || Fits Model: 3034, 3044C, 3056, 3056E, C3.4, C6.6, 279C, 289C, 299C, 267B
YNRSP Brand: YNRSP (Reliable Spare Parts) || Part Number: 4K4709 || Part Type: Sleeve Bearing || Weight: 0.66 lbs (0.3 kg) || Fits Model: 3034, 3044C, 3056, 3056E, C3.4, C6.6, 279C, 289C, 299C, 267B
CTP 4K4709 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
9A
For full view, you need register
Compatible equipment models: 4K4709:
Information:
Remove Rotor Assembly
start by:a) remove generator 1. Remove bolts (3) to remove cowl assembly (2) and cowl cover (1) as a unit from the generator. 2. Remove the bolts to remove cover assembly (4) and door assembly (5) from the generator. 3. Remove terminal marker (6) and disconnect wires (7) (F1 and F2) from the regulator terminal strip. Pull wires (7) from the generator and fasten the wires out of the way of the rotor assembly. 4. Install tooling (A) on the hub of the rotor assembly. Use tool (B) to fasten a hoist to shackle assembly (8) and the eyebolt on tooling (A).5. Put marks on cowl brackets (9) and bracket assembly (10) to show the position and location of the cowl brackets for correct installation. Remove the bolts and cowl brackets (9) from the bracket assembly. 6. Put a piece of sheet metal (11) with a curve between the rotor assembly and the stator assembly. Make sure the piece of sheet metal is as long as the rotor assembly.
The rotor assembly must be kept level during removal to prevent damage to the windings.
7. Install two 5/8"-11 NC forcing screws in bracket assembly (12). Remove bracket assembly (12) and the rotor assembly as a unit from the generator. The weight of the unit is 1350 kg (3000 lb.).Install Rotor Assembly
The rotor assembly must be kept level during installation to prevent damage to the windings.
1. Install tooling (A) on the hub of rotor assembly (3). Use tool (B) to fasten a hoist to shackle assembly (1) and tooling (A) as shown. Put a piece of sheet metal (2) on the rotor assembly as shown. Install rotor assembly (3) and bracket assembly (4) as a unit in the generator. 2. Install bolts (8) and cowl brackets (7) to hold the bracket assembly in position.
Wires (6) must be installed through plastic strap (5) to prevent damage to the wires by the rotor assembly.
3. Put wires (6) in position in the generator.4. Connect wires (6) (F1 and F2) to the regulator terminal strip and install terminal marker (9) on the regulator terminal strip. 5. Install cover assembly (10) and door assembly (11) on the generator. 6. Install cowl (13) and cowl cover (12) as a unit on the generator.end by:a) install generator
start by:a) remove generator 1. Remove bolts (3) to remove cowl assembly (2) and cowl cover (1) as a unit from the generator. 2. Remove the bolts to remove cover assembly (4) and door assembly (5) from the generator. 3. Remove terminal marker (6) and disconnect wires (7) (F1 and F2) from the regulator terminal strip. Pull wires (7) from the generator and fasten the wires out of the way of the rotor assembly. 4. Install tooling (A) on the hub of the rotor assembly. Use tool (B) to fasten a hoist to shackle assembly (8) and the eyebolt on tooling (A).5. Put marks on cowl brackets (9) and bracket assembly (10) to show the position and location of the cowl brackets for correct installation. Remove the bolts and cowl brackets (9) from the bracket assembly. 6. Put a piece of sheet metal (11) with a curve between the rotor assembly and the stator assembly. Make sure the piece of sheet metal is as long as the rotor assembly.
The rotor assembly must be kept level during removal to prevent damage to the windings.
7. Install two 5/8"-11 NC forcing screws in bracket assembly (12). Remove bracket assembly (12) and the rotor assembly as a unit from the generator. The weight of the unit is 1350 kg (3000 lb.).Install Rotor Assembly
The rotor assembly must be kept level during installation to prevent damage to the windings.
1. Install tooling (A) on the hub of rotor assembly (3). Use tool (B) to fasten a hoist to shackle assembly (1) and tooling (A) as shown. Put a piece of sheet metal (2) on the rotor assembly as shown. Install rotor assembly (3) and bracket assembly (4) as a unit in the generator. 2. Install bolts (8) and cowl brackets (7) to hold the bracket assembly in position.
Wires (6) must be installed through plastic strap (5) to prevent damage to the wires by the rotor assembly.
3. Put wires (6) in position in the generator.4. Connect wires (6) (F1 and F2) to the regulator terminal strip and install terminal marker (9) on the regulator terminal strip. 5. Install cover assembly (10) and door assembly (11) on the generator. 6. Install cowl (13) and cowl cover (12) as a unit on the generator.end by:a) install generator
Cat SIS web machinery list:
Parts bearing Caterpillar catalog:
924G, 953, 977K, 977L, 980B, 988
924H, 950, 966C, 966K, 966M, 966M XE, 966R, 972K, 972M, 972M XE, 977K, 977L, 980B, 983
515, 525, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, 936F, 938F, 938G, 938G II, 950F, 950F II, 950G, 960F, 962G, IT18F, IT24F, IT28F, IT28G, IT38F, IT38G, IT38G II, R1300
515, 525, 525B, 525C, 525D, 535B, 535C, 535D, 545, 545C, 545D, 555D, 910E, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 928F, 928G, 928H, 928HZ, 930G, 938F, 938G, 938G II, 938H, 950 GC, IT12B, IT14B, IT14F, ...
515, 518C, 525, 525B, 525C, 528, 528B, 530B, 535B, 535C, 545, 545C, 814F, 815B, 815F, 816F, 924F, 924G, 924GZ, 924H, 924HZ, 926, 928F, 928G, 928H, 928HZ, 930G, 930R, 936, 936F, 938F, 938G, 938G II, 95...
24H, 24M, 611, 615, 615C, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 926, 928F
928G, 928H, 928HZ, IT18F, IT28F, IT28G
533, 543, 924F, 924G, 924GZ, 924H, 924HZ, 924K, 928F, 928G, 928H, 928HZ, 930G, 930K, 938F, 938G, 938G II, 938H, 938K, HA770, HA771, HA870, HA871, IT18F, IT24F, IT28F, IT28G, IT38F, IT38G, IT38G II, IT...
910E, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, IT12B, IT14B, IT14F, IT18F, IT24F, IT28G
918F, 924F, 924G, 924GZ, 924H, 924HZ, 924K, IT18F, IT24F
924G, 924GZ, 924H, 924HZ, 928G, 928HZ, IT28G
928HZ, 930G, 950 GC, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962G II, 962H, IT62G, IT62G II, IT62H
0813698
BEARING
216, 216B, 216B3, 236, 236B, 236B3, 242B, 242B3, 247, 252B, 252B3, 257B3, 259B3, 267B, 268B, 904B, 904H, CB-434D, CB-44B, CB-521, CB-525B, CB-534, CB-534C, CB-534D, CB-54, CB-54B, CB-564D, CB-634C, CB...
216, 216B, 216B3, 236, 236B, 236B3, 242B, 242B3, 247, 252B, 252B3, 257B3, 259B3, 267B, 268B, 904B, 904H, CB-434D, CB-44B, CB-521, CB-525B, CB-534, CB-534C, CB-534D, CB-54, CB-54B, CB-564D, CB-634C, CB...
1413049
BEARING
236, 236B, 236B3, 247, 247B, 248, 252B, 252B3, 267, 267B, 268B, 287, AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D, CB-334D, CB-334E, CB-335D, CB-545
236, 236B, 236B3, 247, 247B, 248, 252B, 252B3, 267, 267B, 268B, 287, AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D, CB-334D, CB-334E, CB-335D, CB-545
236, 236B, 236B3, 248, 252B, 252B3, 268B
1641231
BEARING
416D, 420D, 424D, 428D, 432D, 438D, 442D
416D, 420D, 424D, 428D, 432D, 438D, 442D
1834934
BEARING-SELF-ALIGNING
420D, 420E, 420F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 442D, 442E, 444E, 444F, 446D, 450E, 450F
420D, 420E, 420F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 442D, 442E, 444E, 444F, 446D, 450E, 450F
1641345
BEARING
414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424B, 424B HD, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446D, 450E, 450F
414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424B, 424B HD, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446D, 450E, 450F
2093038
BEARING
TH210, TH215
TH210, TH215
267, 267B, 287
267, 267B, 287, 906H, 906H2, 907H, 907H2, 908H, 908H2, AP1000E, AP1055E, BG1000E, BG1055E, CB-434D, CB-44B, CB-534C, CB-534D, CB-54, CB-54B, CB-564D, CB-634C, CB-634D, CB-64, CD-54, CD-54B, CP-533E, C...
267, 267B, 287, 906H, 906H2, 907H, 907H2, 908H, 908H2, AP1000E, AP1055E, BG1000E, BG1055E, CB-434B, CB-434C, CB-434D, CB-44B, CB-534C, CB-534D, CB-54, CB-54B, CB-564D, CB-634C, CB-634D, CD-54, CD-54B,...
2681941
BEARING-TAPERED ROLLER
267, 267B, 287, AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D
267, 267B, 287, AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D
1995358
BEARING
247, 247B, 267, 267B, 287
247, 247B, 267, 267B, 287