4S9399 BEARING ASSEMBLY CENTER Caterpillar parts
D342, D342C, D8K
Rating:
Alternative (cross code) number:
CA4S9399
4S-9399
4S9399
CA4S9399
4S-9399
4S9399
Weight: 1 pounds 0 kg.
MARINE ENGINE, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Stevens Lake Parts One New Main Engine Bearing (0.050") Fits CAT, Fits Caterpillar 583K, D342, D8K Models Interchangeable with 4S9399, 8N7930, 8N7930
Stevens Lake Parts One New Main Engine Bearing (0.050") || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
Stevens Lake Parts One New Main Engine Bearing (0.050") || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
$166.99
30 Jun 2021
4.0[1.80] Pounds
US: Stevens Lake Pa
One New Main Engine Bearing (0.050") Fits CAT, Fits Caterpillar 583K, D342, D8K Models Interchangeable with 4S9399, 8N7930, 8N7930
Stevens Lake Parts One New Main Engine Bearing (0.050") || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || Please Note That OEM Part Numbers, Models, & Dimensions Are Intended For Your Cross-Reference. Feel || Some Listings Use Stock Images For Customer Reference, Please Allow For Slight Differences.
Stevens Lake Parts One New Main Engine Bearing (0.050") || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || Please Note That OEM Part Numbers, Models, & Dimensions Are Intended For Your Cross-Reference. Feel || Some Listings Use Stock Images For Customer Reference, Please Allow For Slight Differences.
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
If the turbocharger has an exhaust elbow, remove the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install" for the correct procedure.
Loosen the hose clamp and disconnect the air inlet hose from the turbocharger.
Loosen the hose clamp and disconnect the air outlet hose from the turbocharger.
If the turbocharger has a remote wastegate solenoid, disconnect the hose to the solenoid from the turbocharger.
Illustration 1 g01335455
Follow Step 5.a through Step 5.c in order to remove tube assembly (3) for the oil feed.
Remove bolt (5).
Remove banjo bolt (1) and remove sealing washers (2).
Remove tube assembly (3) from the cylinder block. Remove O-ring seal (4) from the tube assembly. Note: Plug the port for the oil feed to the turbocharger with a suitable plug.
Follow Step 6 through Step 6.c in order to remove tube assembly (10) for the oil drain.
Remove bolts (11).
Remove bolts (8) and remove tube assembly (10) from turbocharger (6).
Remove gasket (7) and remove gasket (9).
Illustration 2 g01335456
Remove nuts (15) from turbocharger (6) and remove turbocharger (6) from exhaust manifold (12). Note: Ensure that the weight of the turbocharger is supported as the nuts are loosened.
Remove gasket (14).
If necessary, remove studs (13) from exhaust manifold (12).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
If the turbocharger has an exhaust elbow, remove the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install" for the correct procedure.
Loosen the hose clamp and disconnect the air inlet hose from the turbocharger.
Loosen the hose clamp and disconnect the air outlet hose from the turbocharger.
If the turbocharger has a remote wastegate solenoid, disconnect the hose to the solenoid from the turbocharger.
Illustration 1 g01335455
Follow Step 5.a through Step 5.c in order to remove tube assembly (3) for the oil feed.
Remove bolt (5).
Remove banjo bolt (1) and remove sealing washers (2).
Remove tube assembly (3) from the cylinder block. Remove O-ring seal (4) from the tube assembly. Note: Plug the port for the oil feed to the turbocharger with a suitable plug.
Follow Step 6 through Step 6.c in order to remove tube assembly (10) for the oil drain.
Remove bolts (11).
Remove bolts (8) and remove tube assembly (10) from turbocharger (6).
Remove gasket (7) and remove gasket (9).
Illustration 2 g01335456
Remove nuts (15) from turbocharger (6) and remove turbocharger (6) from exhaust manifold (12). Note: Ensure that the weight of the turbocharger is supported as the nuts are loosened.
Remove gasket (14).
If necessary, remove studs (13) from exhaust manifold (12).
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
854G, D9L
854G, D10N, D10R, D10T, D10T2, D9L
814F II, 824S, 834B, 836
4J8004
BEARING-SLEEVE
814F II, 824S, 834B, 836
814F II, 824S, 834B, 836
7J5322
BEARING
844H
844H
9J2607
BEARING
854G, 854K, D10, D11N, D11R, D11T
854G, 854K, D10, D11N, D11R, D11T
6N7046
BEARING--MAIN
992, D10, D348
992, D10, D348
6N7045
BEARING--MAIN
992, D10, D348
992, D10, D348
6N7043
BEARING--MAIN (.050 IN. UNDERSIZE)
992, D10, D348
992, D10, D348
6N7044
BEARING--MAIN (.025 IN. UNDERSIZE)
992, D10, D348
992, D10, D348
6N3736
BEARING CENTER
D8H, D8K
D8H, D8K
6N3739
BEARING CENTER
D8H, D8K
D8H, D8K