AVSPARE.COM
parts catalog

BEARING 5027377 - Caterpillar


5027377 BEARING Caterpillar parts
Rating:
31
Alternative (cross code) number:
CA5027377
502-7377
5027377
Caterpillar 5027377 BEARING
Weight: 1 pounds 0 kg.

Buy BEARING 5027377 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 2 g06265912
Engage lever (5) and rotate seat group (6) out of the way.
Illustration 3 g06265915
Open access door (7).
Illustration 4 g06265925
Remove two bolts (8) and remove platform (9).
Illustration 5 g06265931
Remove two bolts (10) and two clamps (11). Remove four cable straps (12).
Disconnect hose assembly (13) , hose assembly (14), hose assembly (15) , hose assembly (16), and the O-ring seals. Position the hose assemblies out of the way.
Illustration 6 g06265957
Remove four cable straps (21).
Disconnect harness assembly (17), harness assembly (18), harness assembly (19), harness assembly (20), harness assembly (22), and harness assembly (23). Position the harness assemblies out of the way.
Illustration 7 g06265967
Disconnect hose assembly (24), hose assembly (25), hose assembly (26), hose assembly (27), hose assembly (28), hose assembly (29), and remove the O-ring seals.
Illustration 8 g06265978
Disconnect harness assembly (30), harness assembly (31), harness assembly (32), harness assembly (33), and remove the O-ring seals. Position the hose assemblies out of the way.
Illustration 9 g06266009
Remove bolts (34). Disconnect hose assembly (35) and remove the O-ring seal.
Illustration 10 g06266013
View from the bottom of the piston pump (fan).
Remove bolts (36). Disconnect hose assembly (37) and remove the O-ring seal.
Illustration 11 g06266073
Attach suitable lifting device to piston pump (propel) (38) and piston pump (fan) (39) as an assembly. The combined weight of piston pump (propel) (38) and piston pump (fan) (39) is approximately 103 kg (227 lb).
Illustration 12 g06266116
Remove two bolts (40).
Illustration 13 g06266120
Pull piston pump (propel) (38) and piston pump (fan) (39) away from the gearbox to free the spline. Remove O-ring seal (41) and discard. Remove piston pump (propel) (38) and piston pump (fan) (39) as an assembly.
Illustration 14 g06266249
Remove two bolts (42).
Illustration 15 g06266126
Remove piston pump (fan) (39) from piston pump (propel) (38).Installation Procedure
Install piston pump (fan) (39) in the reverse order of removal.
Tighten bolts (10) to a torque of 15 3 N m (133 27 lb in).
Apply Tooling (A) to the splines of piston pump (propel) (39) prior to installation.
Apply Tooling (A) to the splines of piston pump (propel) (38) prior to installation.

Caterpillar parts catalog:

Caterpillar parts catalog
C3.3 DE33E0 Generator Set GT200001-UP
C3.3 DE33E0 Generator Set EC300001-UP
C3.3 DE33E3 Generator Set GT300001-UP
C3.3 DE33E3 Generator Set EC400001-UP
C3.3 DE50E0/DE55E0/DE65E0/DE50E2 Generator Set GT400001-UP
C3.3 DE50E0/DE55E0/DE65E0/DE50E2 Generator Set EC500001-UP
C4.4 DE55E2 Generator Set GT600001-UP
C4.4 DE55E2 Generator Set EC700001-UP
C4.4 DE65E3, DE88E0, DE88E3, DE110E3, DE110E2 Generator Set GT800001-UP


Parts bearing Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.