BEARING AS 5031158 - Caterpillar

Procedure To Modify The 9R4417 Bracket Assembly (1)
1. Cut a 45 mm (1.8") length from 9R4441 Shaft (2).2. Weld the 45 mm (1.8") length of the shaft to the left end (operator facing the controls) of existing 9R4442 Shaft (3). See Illustration 1.
Illustration 1. 9R4404 Swing (3-Lever) Control Group. See text for Item description.Procedure To Modify The 9R4420 Bracket Assembly (4)
1. Cut a notch in 9R4421 Plate (5) identical to the notch that already exists in 9R4422 Plate (6). See Illustrations 1, 2, and 3.
Illustration 2. 9R4422 Plate. Use these dimensions to modify the 9R4421 Plate.2. Install the parts shown in the chart. See Illustration 3.
Illustration 3. Assembly view of conversion (facing operator position). Location of new notch (arrow) in the 9R4421 Plate. See the chart for Item description.