BEARING-BALL 5060675 - Caterpillar

Accumulated grease and oil on a machine is a fire hazard. Remove this debris with steam cleaning or high pressure water, at least every 1000 hours or each time any significant quantity of oil is spilled on a machine.
Note: For maximum service life of the machine, make a thorough walk-around inspection before you operate the machine. Inspect the machine for leaks. Remove any debris from the engine compartment and the undercarriage. Ensure that all guards, covers, and caps are secured. Inspect all hoses and belts for damage. Make the needed repairs before you operate the machine.Perform the following procedures on a daily basis.
Operation and Maintenance Manual, "Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate"
Operation and Maintenance Manual, "Backup Alarm - Test"
Operation and Maintenance Manual, "Brake Reservoir Oil Level - Check"
Operation and Maintenance Manual, "Braking System - Test"
Operation and Maintenance Manual, "Cooling System Level - Check"
Operation and Maintenance Manual, "Engine Air Filter Service Indicator - Inspect"
Operation and Maintenance Manual, "Engine Oil Level - Check"
Operation and Maintenance Manual, "Fuel System Water Seperator - Drain"
Operation and Maintenance Manual, "Hydraulic System Oil Level - Check"
Operation and Maintenance Manual, "Kingpin Bearings (Front) - Lubricate"
Operation and Maintenance Manual, "Loader Bucket, Cylinder, and Linkage Bearings - Lubricate"
Operation and Maintenance Manual, "Seat Belt - Inspect"
Operation and Maintenance Manual, "Tire Inflation - Check"
Operation and Maintenance Manual, "Transmission Oil Level - Check"
Operation and Maintenance Manual, "Wheel Nut Torque - Check"Refer to the Maintenance Section for the detailed procedures. Refer to the Maintenance Interval Schedule for a complete list of scheduled maintenance.