BEARING-JOURNAL 5069034 - Caterpillar

Illustration 1 g03395716
Table 1
Specification for 324-5552 Exhaust Fitting
Item Qty Part Specification Description
1 8 247-3393 Clamp As Use the following procedure to tighten the clamp assemblies:
Before assembly, apply Loctite C5A Copper Anti-Seize to threads, the bearing surfaces, and inside diameter of the clamp assemblies.
1. Tighten the clamp assemblies to 8.5 1 N m (75.2 9 lb in).
2. Gently hit around the clamp assemblies with a soft hammer.
3. Again, tighten the clamp assemblies to 8.5 1 N m (75.2 9 lb in).
2 4 315-7909 Bellows As Ensure that the bellows are installed in the flow direction as indicated by an arrow on the bellows.