BEARING AS 5106430 - Caterpillar

Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01119793
Remove elbow (1) and elbow (3) .
Remove cover (2) .
Remove gear (4) and bracket (5) .
Illustration 2 g01119837
Remove quad ring seal (7). Use Tooling (E) to remove impeller (6) from the shaft.
Illustration 3 g01119842
Remove cam liner (9) and the pin from housing (8) .
Remove quad ring seal (10) and wear plate (11) from housing (8) .
Use Tooling (C) to remove retaining ring (12) .
Remove washer (13) .
Illustration 4 g01119860
Remove seal assembly (15) from shaft assembly (14) .Note: Place a mark on the housing and the body assembly for correct alignment at assembly.
Illustration 5 g01119864
Remove bolts (16). Separate housing (8) from body assembly (17) .
Illustration 6 g01119867
Use Tooling (A) to remove seal (18) from housing (8) .
Illustration 7 g01119869
Remove seal (19) from shaft assembly (14) .
Illustration 8 g01119871
Use Tooling (B) to remove retaining ring (20) .
Use a soft hammer to remove shaft assembly (14) from body assembly (17) .
Illustration 9 g01119877
Use Tooling (A) to remove seal (21) from body assembly (17) .
Illustration 10 g01119882
Use Tooling (D) and a suitable press to remove bearing (22) from shaft assembly (14) .
Illustration 11 g01119883
Use Tooling (C) to remove retaining ring (25) from shaft assembly (14) .
Remove spacer (24) .
Use Tooling (D) and a suitable press to remove bearing (23) from shaft assembly (14) .