BEARING-RLR-YM 5222302 - Caterpillar

1. Remove nut and bolt that hold lock (5) in position.2. Remove lock (5).3. Remove cap (2) and lock (4).4. Use a spanner wrench to loosen (turn clockwise) adjustment nut (1).5. Tighten sprocket shaft nut (3) to a torque of ... 600 to 700 lb. ft.(810 to 950 N m)6. Install lock (4) to hold nut (3) in position. Install cap (2).7. While sprocket is turned, tighten (turn counterclockwise) adjustment nut (1) to a torque of ... 2400 50 lb. ft.(3240 70 N m)8. Turn adjustment nut (1) clockwise (about 6 to 10 lugs) to lower the torque to ... 300 10 lb. ft.(410 14 N m)9. Use the spanner wrench and tighten (turn counterclockwise) nut (1) again to a torque of ... 350 10 lb. ft.(470 14 N m)10. Make a mark on nut (1) and holder assembly (6).11. Turn nut (1) counterclockwise an additional ... 45°12. Install lock (5) in one of the notches on adjustment nut (1). It may be necessary to continue to turn nut (1) in a counterclockwise direction to install lock (5).13. Install the nut and bolt that holds the lock in position on the adjustment nut.