BEARING 5362411 - Caterpillar

Illustration 15 g00536379
Remove valve spool (48) from the valve body.
Illustration 16 g00536380
Illustration 17 g00536381
Remove plug (49), spring (50) and valve (51) from the control valve body.
Inspect the O-ring seal on plug (49). Replace the O-ring seal, if necessary.
Illustration 18 g00536383
Housings (52), (53), and (54) holds springs under compression. To prevent possible personal injury, use caution when the housings are removed.
Remove two bolts (55) and remove the washers from both ends of the valve body. remove housings (52), (53), and (54) from the valve body.
Illustration 19 g00536384
Remove stem (56) from the valve body.
Illustration 20 g00536387
Check the condition of O-ring seal (57) on housing (53). Replace the O-ring seal, if necessary.
Illustration 21 g00536392
Remove piston (58) and plug (60) from housing (53) .
Check the condition of O-ring seal (59) on plug (60). Replace the O-ring seal, if necessary.
Illustration 22 g00536395
Note: Housings (52) and (54) are disassembled in a similar manner. Follow steps 33 through 37 for both of the housings.Note: Housing (52) will have two springs (62) .
Remove retainer (61), spring (62) and retainer (63) from housing (54) .
Check the condition of O-ring seal (64) on housing (54). Replace the O-ring seal, if necessary.
Remove plug (66) and the O-ring seal from housing (54), if necessary.
Remove screws (65) and plunger (67) from housing (54) .
Illustration 23 g00536419
Remove nut (68) from plunger (67) .
Check the condition of O-ring seal (69) on plunger (67). Replace the O-ring seal, if necessary.
Illustration 24 g00536421
Illustration 25 g00536423
Note: Use a 1/4 inch - 20 threaded rod to pull valve assembly (70) from the main valve body.
Remove plug (72), spacer (71) and valve assembly (70) from the control valve body.
Inspect the O-ring seal on plug (72). Replace the O-ring seal, if necessary.
Illustration 26 g00536425
Remove O-ring seals and rings (73) from valve assembly (70) .
Inspect the O-ring seals and rings. Replace the O-ring seals and replace the rings, if necessary.
Illustration 27 g00536429
Remove plugs (74) and O-ring seals, if necessary.