BEARING 5362991 - Caterpillar

Illustration 1 g00691422
Backup Alarm - The alarm sounds when the transmission control lever is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up. The backup alarm is located on the left rear of the machine.
Illustration 2 g00637537
Note: The toggle switch is located under the protective cap.A three-position switch is found at the rear of the backup alarm. The three positions on the switch are high, low, and medium. The three-position switch regulates the volume of the alarm.The alarm is set from the factory at the highest sound level. The setting should remain on high, unless the job site requires a lower sound level.