5I8419 BEARING Caterpillar parts
320 L
Rating:
Alternative (cross code) number:
CA5I8419
5I-8419
5I8419
CA5I8419
5I-8419
5I8419
Weight: 1 pounds 0 kg.
EXCAVATOR,
Compatible equipment models: 5I8419:
Number on catalog scheme:
27
For full view, you need register
Information:
Illustration 9 g01108601
Generator (32) Junction BoxThe junction box is located on top of the generator. The junction box connects the generator, the controller, and the magnet.
Illustration 10 g01108637
Junction Box Terminal Connections (15 kW machine) (33) Terminal F1 (34) Terminal F2 (35) Terminal B2 (36) Terminal A1 (37) Not used (38) Terminal A2 (39) Cable to Magnet (40) Cable to Controller
Illustration 11 g01109793
Junction Box Terminal Connections (12.5 kW machine) (41) Terminal F1 (42) Terminal F2 (43) Terminal B2 (44) Terminal A1 (45) Not used (46) Terminal A2 (47) Cable to Magnet (48) Cable to ControllerThe Junction Box connections for 15 kW and 12.5 kW machines differ only at Terminals B2 and A1. One gray wire to Terminal B2 and one white wire to Terminal A1 are connections to the magnet on the 15 kW machine. Two black wires are connected to Terminal B2 for the 12.5 kW machine. One blue wire and one brown wire are connected to Terminal A1 for the 12.5 kW machine.The following descriptions apply to both machines (15 kW and 12.5 kW).Terminal F1 (33) and (41) - (Connections to terminal F1) small green wire from Terminal Block (18) pin 4 and small brown F1 wire to the shunt field of the generatorTerminal F2 (34) and (42) - (Connections to terminal F2) small purple wire from Terminal Block (18) pin 7 and small brown F2 wire to the shunt field of the generatorTerminal B2 (35) and (43) - (Connections to terminal B2) Large Gray wire (15 kW machine) or Two Black wires (12.5 kW machine) to the Magnet, two medium size brown B2 wires to the shunt field of the generator and small dark brown wire to Terminal Block (18) pin 11 (High Voltage Measurement) and Terminal Block (18) pin 13 (Overload Signal)Terminal A1 (36) and (44) - (Connections to terminal A1) Large white wire (15 kW machine) or One Blue, One Brown wire (12.5 kW machine) to the Magnet, the small blue wire to the Terminal Block (18) pin 12 (High Voltage Measurement) and two medium size brown wires to one of the generator brushes (the opposite brush is connected to the series field)No Connections (37) and (45) - Not UsedTerminal A2 (38) and (46) - (Connections to terminal A2) small brown A2 wire to opposite Front Generator Brush and jumper to the coils of the series field in the generator and small gray wire to Terminal Block (18) pin 14 (Overload Signal)
Never connect or disconnect the magnet or the generator unless the engine is shut down and the main switch for the generator is in the OFF position.Never handle the leads to the magnet unless the engine is shut down and the main switch at the magnet controller for the generator is in the OFF position.High voltage exists at the generator system when the generator is activated.Failure to follow this procedure may result in personal injury or death.
Illustration 12 g01109795
Magnet Connectors (15 kW machine) (49) 135-1670 Connector-female (50) 135-1669 Connector-male
Illustration 13 g01366110
5-Pin Magnet Connector (12.5 kW machine)The
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
311B, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320B U, 320C, 3...
311B, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320B U, 320C, 3...
311C, 315C, 315D L, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320N, 321B, 321C, 321D LCR, 322, 32...
311C, 315C, 315D L, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320N, 321B, 321C, 321D LCR, 322, 32...
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
320 L, 320B, 320B L, 320N, 321B, 322 FM L, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330D FM, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, ...
320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 320N, 321C, ...
320 L, 320B, 320B L, 320N, 321B
320 L, 320N, E200B, S305
0990062
BEARING
320 L, 320N, 322, E200B, E300B
320 L, 320N, 322, E200B, E300B
320 L, 320N, E200B, S305
320 L, 320N, E200B
325, 325 L, HEX-WEDGE
325, 325 L
1865588
BEARING
321C, 325C, 325C FM, 365B II, 385B
321C, 325C, 325C FM, 365B II, 385B
5I7618
BEARING
320 L
320 L
1152633
BEARING
322, 322 L, 325B
322, 322 L, 325B
320 L, 320N, 322 L, 325, 325 L, 325B L, 330B L
320 L, 320N, 322 L, 325, 325 L, 325B L, 330B L
320, 320 L, 320N, E200B
7Y4233
BEARING
320 L
320 L