BEARING 5J8118 - Caterpillar

For connection to the mains supply of a building, the power pack must comply with the power, voltage, and frequency conditions of the equipment in the building. Different power, voltage, or frequency, or the wrong connection can cause damage to the equipment, fire, personal injury, or even death.Keep the power pack clean. This reduces injury, accident, and fire hazards.Safely store objects you carry with you in the places provided for this (for example in the storage compartment).Observe all safety, warning, and information labels.Ensure that all safety devices are properly installed and functional before starting work.Before putting the power pack into operation, ensure that nobody is in the danger zone.Do not operate the power pack near flammable fluids.Immediately replace damaged connecting cables.Do not use the connecting cable to carry or hang up the power pack, or to pull the connector out of the outlet.Keep the connecting cable away from heat, oil, sharp edges, or moving parts of devices.Job Site
The operator is responsible for other persons.Before starting work, familiarize yourself with the job site. This applies to, for example:
Obstacles in the job site and machine travel area
Any barriers separating the job site from public roads
Soil weight-bearing capacity
Existing overhead and underground lines
Special operating conditions (for example dust, steam, smoke, asbestos)The maximum dimensions of the power pack must be known to the operator. Refer to Specifications for more information.Maintain a safe distance (for example from buildings, edges of building pits).During work in buildings or in enclosed areas, look out for:
Height of the ceiling/clearances
Width of entries/passages
Maximum load of ceilings and floorsDue to hot machine parts, maintain a safe distance from easily flammable material (for example from hay, dry leaves).Operating Radius
Illustration 1 g06021719
Table 1
Position Function
(A) Power Pack HPU 300
(B) Mini Hydraulic Excavator 300.9D VPS
(C) Minimum operating radius with connected power pack 1.5 m (5 ft)
(D) Maximum operating radius with connected power pack 10.0 m (32 ft 10 inch)
Minimum bending radius of power pack hydraulic hoses: 300 mm (12 inch)