BEARING AS-ROLLER 5P5359 - Caterpillar

Illustration 1 g01432347
New Purge Pump and Service Pack (1) Inlet Port (9/16 - 18 inch) (2) Outlet Port (7/16 - 20 inch)
Illustration 2 g01432346
Old Purge Pump and Service Pack (3) Inlet Port (1/4 - 18inch) (4) Outlet Port (1/8 - 27 inch)The new purge pump requires a new electrical connector as well as a new inlet elbow and a new outlet elbow. The new service pack only requires a new inlet elbow and a new outlet elbow.The new parts that are required for the new purge pump and the service pack are listed in Table 1 and Table 2.
Table 1
Required Parts for the 297-7223 Air Pump Gp    
Sales Model     Part Number    
C13 and C15     304-9992 Air Pump Gp    
C13 and C15     311-3502 Power Harness As    
C13 and C15     4R-8686 Flared Elbow    
C13S/N:LEE1-1974     6V-1355 Elbow    
C13 and C15     6V-5048 O-Ring Seal    
C13 and C15     6V-5049 O-Ring Seal    
C13     5P-4924 Elbow    
C15     030-7947 Elbow    Note: Install the updated fitting before installing the pump on the bracket.Note: C13 engines with a serial number that is less than LEE1974-UP will use a 6V-1355 Elbow instead of using a 4R-8686 Flared Elbow.
Table 2
Required Parts for the 260-6800 Air Pump Gp    
Sales Model     Part Number    
C13 and C15     304-9994 Air Pump Gp    
C13 and C15     4R-8686 Flared Elbow    
C13S/N:LEE1-1974     6V-1355 Elbow    
C13 and C15     6V-5048 O-Ring Seal    
C13 and C15     6V-5049 O-Ring Seal    
C13     5P-4924 Elbow    
C15     030-7947 Elbow