BEARING 6K2697 - Caterpillar

Remove Exhaust Manifold
1. Remove the nuts and bolts from carburetor rods (2) and (5) and the governor linkage rod (1).2. Remove four bolts (3) and channel assembly (4). Remove four spacers. 3. Remove bolts and elbow assemblies (6) from exhaust manifold. Remove gaskets. 4. Disconnect oil line (7). Disconnect opposite end of oil line (7) from the top of the turbocharger lubrication valve. 5. Remove seven bolts (8) from pipe (9) and exhaust manifold. 6. Remove bolts (12) and connector (10) from manifold.7. Fasten tool (A) and a hoist to exhaust manifold (11). Remove sixteen bolts (13) from the exhaust manifold. Remove manifold and gaskets. Weight of the manifold is 185 lb. (84 kg).Install Exhaust Manifold
1. Inspect all O-ring seals and make replacements if necessary. 2. Install tool (A) and hoist on exhaust manifold.3. Install the exhaust manifold (1) on the engine. Install new manifold gaskets.4. Put 5P3931 Anti-Seize Compound on threads of bolts. Install the bolts that hold the manifold to the cylinder head. Tighten bolts to a torque of 110 10 lb.ft. (149 14 N m). 5. Install oil line (2). 6. Put engine oil on O-ring seals and install connector (3) and elbow assemblies (4) and new gaskets in position on manifold. 7. Put spacers (6) in place and install channel assembly (5).8. Connect carburetor and governor linkage rods.