6P0593 BEARING-ROLLER Caterpillar parts
578, 583R, 587R, 589, 814B, 814F, 815B, 815F, 816B, 816F, 824C, 824G, 824G II, 824H, 825C, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 836, 836G, 836H, 918F, 924F, 926, 938F, 950F, 950F II, ...
Rating:
Alternative (cross code) number:
CA6P0593
6P-0593
6P0593
CA6P0593
6P-0593
6P0593
Weight: 0.01 pounds 0 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Related part:
6P0593
BEARING-YM
3864959
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$11.31
12 Sep 2023
Amazon.com
CTP 6P0593 Roller Bearing for Heavy Equipment
CTP Roller Bearing Only || Sold in each || Easy in-and-out fit
CTP Roller Bearing Only || Sold in each || Easy in-and-out fit
$18.26
06 Dec 2021
US: Florida-Parts-Z
6P0593 - Bearing-Roller 5p1885 fits Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$10.59
19 May 2022
Amazon.com
CTP 6P0593 Roller Bearing for Heavy Equipment
CTP Roller Bearing Only || Sold in each || Easy in-and-out fit
CTP Roller Bearing Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
5
For full view, you need register
Compatible equipment models: 6P0593:
Information:
Conditions Which Generate This Code:
Illustration 1 g01362399
Connections of the 5 Volt SupplyThe sensor supply is a power supply that is internal to the ECM. The sensor supply provides 5 DCV in order to operate the oil temperature sensor. The control module shall monitor sensor supply voltage for a low voltage condition. If the voltage drops below 4 DCV for 5 seconds, a diagnostic code is generated. The delay will prevent a diagnostic code from being logged when the machine is started. The diagnostic code will be cleared when the voltage is above 4.2 DCV for 5 seconds.The results of this diagnostic code are listed:
All of the associated sensors will also log diagnostic codes.
When this diagnostic code occurs, the action lamp and the action alarm are ON.The possible causes of the diagnostic code are listed:
The supply circuit (wire R977-OR) is shorted to the ground circuit in the machine harness.
The ECM has failed. This is unlikely.Test Step 1. CHECK THE SENSOR.
Ensure that the diagnostic code is present. The diagnostic code should be active.
Observe the status of the diagnostic code.
Disconnect the machine harness from the sensor.Expected Result:The diagnostic code is NO longer active. Results:
OK - The diagnostic code is NO longer active.Repair: The sensor has failed. Replace the sensor.STOP
NOT OK - The diagnostic code remains active. The sensor is NOT causing the diagnostic code. Proceed to test step 2.Test Step 2. CHECK FOR SHORT TO GROUND
The sensor remains disconnected from the machine harness.
Turn the disconnect switch to the OFF position.
Disconnect the machine harness from the ECM.
At the ECM, measure the resistance between the contact of the sensor supply voltage and frame ground.Expected Result:The resistance that is measured should be greater than 5000 ohms. Results:
OK - The resistance that is measured is greater than 5000 ohms. The harness circuit is correct. The ECM may have failed.Repair: It is unlikely that the ECM has failed. Exit this diagnostic code procedure and perform this diagnostic code procedure again. Prior to replacing an ECM, contact your dealership for possible consultation with Caterpillar. This consultation may greatly reduce repair time. If the ECM requires replacement, refer to Testing and Adjusting, "Electronic Control Module (ECM) - Replace". STOP
NOT OK - The resistance that is measured is less than 5000 ohms.Repair: The machine harness has failed. There is a short between frame ground and the contact for the sensor supply voltage in the machine harness. Repair the machine harness or replace the machine harness. STOP
Illustration 1 g01362399
Connections of the 5 Volt SupplyThe sensor supply is a power supply that is internal to the ECM. The sensor supply provides 5 DCV in order to operate the oil temperature sensor. The control module shall monitor sensor supply voltage for a low voltage condition. If the voltage drops below 4 DCV for 5 seconds, a diagnostic code is generated. The delay will prevent a diagnostic code from being logged when the machine is started. The diagnostic code will be cleared when the voltage is above 4.2 DCV for 5 seconds.The results of this diagnostic code are listed:
All of the associated sensors will also log diagnostic codes.
When this diagnostic code occurs, the action lamp and the action alarm are ON.The possible causes of the diagnostic code are listed:
The supply circuit (wire R977-OR) is shorted to the ground circuit in the machine harness.
The ECM has failed. This is unlikely.Test Step 1. CHECK THE SENSOR.
Ensure that the diagnostic code is present. The diagnostic code should be active.
Observe the status of the diagnostic code.
Disconnect the machine harness from the sensor.Expected Result:The diagnostic code is NO longer active. Results:
OK - The diagnostic code is NO longer active.Repair: The sensor has failed. Replace the sensor.STOP
NOT OK - The diagnostic code remains active. The sensor is NOT causing the diagnostic code. Proceed to test step 2.Test Step 2. CHECK FOR SHORT TO GROUND
The sensor remains disconnected from the machine harness.
Turn the disconnect switch to the OFF position.
Disconnect the machine harness from the ECM.
At the ECM, measure the resistance between the contact of the sensor supply voltage and frame ground.Expected Result:The resistance that is measured should be greater than 5000 ohms. Results:
OK - The resistance that is measured is greater than 5000 ohms. The harness circuit is correct. The ECM may have failed.Repair: It is unlikely that the ECM has failed. Exit this diagnostic code procedure and perform this diagnostic code procedure again. Prior to replacing an ECM, contact your dealership for possible consultation with Caterpillar. This consultation may greatly reduce repair time. If the ECM requires replacement, refer to Testing and Adjusting, "Electronic Control Module (ECM) - Replace". STOP
NOT OK - The resistance that is measured is less than 5000 ohms.Repair: The machine harness has failed. There is a short between frame ground and the contact for the sensor supply voltage in the machine harness. Repair the machine harness or replace the machine harness. STOP
Cat SIS web machinery list:
Parts bearing Caterpillar catalog:
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D9L
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D9L
D10N, D10R, D10T, D10T2
14G, D9R, D9T
7A, 7S, 814, 814B, 814F, 814F II, 816B, 816F, 816F II, D7F, D7G, D7G2, D7H
7A, 7S, 814B, 814F, 814F II, 814S, 816F, 816F II, D7F, D7G, D7G2
844, 844H, 844K, D8L, D9N
924G, 924GZ, 924H, 924HZ, 928HZ, 930G, 930K, 938F, 973, 973C, 973D, IT38G II, IT38H
924K, 930K, 950K, 962K, 973, 973C, 973D, 986H
963, 963B, 963C, 963D, 973, 973C, 973D
320D, 324D L, 325B L, 325C, 325D L, 329D L, 973, 973C, 973D, D7E, D7E LGP
973, 973C, 973D
973, 973C, 973D, 977K, 977L
943, 953, 953B, 953C, 953D
525B, 535B, 545, 572R, 572R II, 623H, 631B, 631D, 631E, 631G, 637D, 637E, 637G, 953, 953C, 953D, D7H, D7R, D7R II, D7R XR
14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 943, 953, 953C, 953D, D6R, D6R STD, D6T, D6T LGP, D6T LGPPAT
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-650B, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-225C, BG-2455C, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, D6H, D6H II, D6H XL...
583T, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, PL83
2582306
BEARING-SLEEVE
D6R, D6R II
D6R, D6R II