7D7849 BEARING Caterpillar parts
120, 140
Rating:
Alternative (cross code) number:
CA7D7849
7D-7849
7D7849
CA7D7849
7D-7849
7D7849
Weight: 6 pounds 2 kg.
MOTOR GRADER,
Information:
DEF Tank Level Inducement
DEF Tank Level Fault Occurrence
Two options are available but only one option will be enabled.Option 1 - Reduced Performance (Derates)Option 1 is the default setting for inducement. If the DEF level falls below 20%, an amber indicator will illuminate below the DEF level gauge on the panel. To avoid further inducements, add DEF to the DEF tank.Level 1: If the DEF level falls below 13.5%, the Emissions System Malfunction lamp will illuminate. The amber indicator next to the DEF level gauge on the panel will continue to remain lit.Level 2 (Mild): If the DEF level is below 7.5%, the Emissions System Malfunction lamp will flash slowly. The amber indicator below the DEF level gauge on the panel will remain lit. Level 2 (Severe): If the DEF level falls below 1% without a loss of DEF pressure, the engine is derated by 25% torque over a 10 minute period.Level 3: When the DEF level falls below 3% with a loss of DEF pressure, the engine enters a 5 minute cool down period. The engine is derated by 100% torque. The reduced performance is followed by engine at low idle only or engine shutdown. The following indications will be present:
The Emissions System Malfunction lamp will flash quickly
The Shutdown lamp will be on
The engine will be restricted to low idle or will be shut down
The amber indicator below the DEF level gauge on the panel will be lit.
Illustration 1 g03813913Option 2 - Reduced Time (No Derates)Option 2 is an alternative setting for applications with auxiliary equipment that could be damaged if the engine is derated.If the DEF level falls below 20%, an amber indicator will illuminate below the DEF level gauge on the panel. To avoid further inducements, add DEF to the DEF tank.Level 1: If the DEF level falls below 13.5%, the Emissions System Malfunction lamp will illuminate. The amber indicator next to the DEF level gauge on the panel will continue to remain lit.Level 2: If the DEF level is below 7.5%, the Emissions System Malfunction lamp will flash slowly. The amber indicator below the DEF level gauge on the panel will remain lit.Level 3: If the DEF level is below 3%, the engine enters a 5 minute cool down period. The engine is derated by 100% torque. The following indications will be present:
The Emissions System Malfunction lamp will flash quickly
The Shutdown lamp will be on
The amber indicator below the DEF level gauge on the panel will be lit.
Illustration 2 g03813924Tampering/Dosing Interruption
The Emissions System Malfunction lamp will illuminate for a fault resulting from SCR system tampering or an SCR system fault. If the fault is the result of system tampering, a first occurrence will result in a level 1 inducement for a duration of 2.5 hours. Repeat occurrences will result in a level 1 inducement duration of 5 minutes.If a fault condition exists for the entire duration of inducement level 1, the strategy advances to inducement level 2. For a fault resulting from SCR system tampering or an
DEF Tank Level Fault Occurrence
Two options are available but only one option will be enabled.Option 1 - Reduced Performance (Derates)Option 1 is the default setting for inducement. If the DEF level falls below 20%, an amber indicator will illuminate below the DEF level gauge on the panel. To avoid further inducements, add DEF to the DEF tank.Level 1: If the DEF level falls below 13.5%, the Emissions System Malfunction lamp will illuminate. The amber indicator next to the DEF level gauge on the panel will continue to remain lit.Level 2 (Mild): If the DEF level is below 7.5%, the Emissions System Malfunction lamp will flash slowly. The amber indicator below the DEF level gauge on the panel will remain lit. Level 2 (Severe): If the DEF level falls below 1% without a loss of DEF pressure, the engine is derated by 25% torque over a 10 minute period.Level 3: When the DEF level falls below 3% with a loss of DEF pressure, the engine enters a 5 minute cool down period. The engine is derated by 100% torque. The reduced performance is followed by engine at low idle only or engine shutdown. The following indications will be present:
The Emissions System Malfunction lamp will flash quickly
The Shutdown lamp will be on
The engine will be restricted to low idle or will be shut down
The amber indicator below the DEF level gauge on the panel will be lit.
Illustration 1 g03813913Option 2 - Reduced Time (No Derates)Option 2 is an alternative setting for applications with auxiliary equipment that could be damaged if the engine is derated.If the DEF level falls below 20%, an amber indicator will illuminate below the DEF level gauge on the panel. To avoid further inducements, add DEF to the DEF tank.Level 1: If the DEF level falls below 13.5%, the Emissions System Malfunction lamp will illuminate. The amber indicator next to the DEF level gauge on the panel will continue to remain lit.Level 2: If the DEF level is below 7.5%, the Emissions System Malfunction lamp will flash slowly. The amber indicator below the DEF level gauge on the panel will remain lit.Level 3: If the DEF level is below 3%, the engine enters a 5 minute cool down period. The engine is derated by 100% torque. The following indications will be present:
The Emissions System Malfunction lamp will flash quickly
The Shutdown lamp will be on
The amber indicator below the DEF level gauge on the panel will be lit.
Illustration 2 g03813924Tampering/Dosing Interruption
The Emissions System Malfunction lamp will illuminate for a fault resulting from SCR system tampering or an SCR system fault. If the fault is the result of system tampering, a first occurrence will result in a level 1 inducement for a duration of 2.5 hours. Repeat occurrences will result in a level 1 inducement duration of 5 minutes.If a fault condition exists for the entire duration of inducement level 1, the strategy advances to inducement level 2. For a fault resulting from SCR system tampering or an
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
7M7219
BEARING-THRUST
1140, 1160, 120, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2,...
1140, 1160, 120, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2,...
3H1996
BEARING
120B, 12E, 12F, 140, 140B, 14E, 3304B, 583T, D7E, D7E LGP, D8R II, D8T, PL83
120B, 12E, 12F, 140, 140B, 14E, 3304B, 583T, D7E, D7E LGP, D8R II, D8T, PL83
5M0704
BEARING-INNER
117, 120B, 12E, 12F, 140, 140B, 14E, 953, 953B, 977H, D4H, D4H XL, D4HTSK II, D4HTSK III, D5, D5B, D5H, D5H XL, D5HTSK II
117, 120B, 12E, 12F, 140, 140B, 14E, 953, 953B, 977H, D4H, D4H XL, D4HTSK II, D4HTSK III, D5, D5B, D5H, D5H XL, D5HTSK II
7M1154
BEARING
120B, 12E, 12F, 140, 140B, 14E, 508, 518, 527, 561B, 561C, 931B, 943, 977K, 977L, D4D, D4E, D4E SR, D5, D5B, D5C, D5E, D5HTSK II, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL
120B, 12E, 12F, 140, 140B, 14E, 508, 518, 527, 561B, 561C, 931B, 943, 977K, 977L, D4D, D4E, D4E SR, D5, D5B, D5C, D5E, D5HTSK II, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL
5F0255
BEARING
120, 120B, 12E, 140, 140B, 14E, 583H, 621, 621B, 627, 627B, D8H
120, 120B, 12E, 140, 140B, 14E, 583H, 621, 621B, 627, 627B, D8H
4D2156
BEARING ASSEM.
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
7F7278
BEARING
120, 120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 12F, 140, 140B, 14E
5D4799
BEARING
120, 12F, 14E
120, 12F, 14E
3H8509
BEARING
120, 120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 12F, 140, 140B, 14E
3H8510
BEARING
120, 120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 12F, 140, 140B, 14E
6F2320
BEARING
120, 120B, 12E, 140, 140B, 14E
120, 120B, 12E, 140, 140B, 14E
3D0371
BEARING
140, 140B, 14E
140, 140B, 14E
7D7848
BEARING
12F, 14E
12F, 14E
6D4595
BEARING
14E
14E
7D7955
BEARING
12F, 14E
12F, 14E
9D1373
BEARING ASSEM.
12F, 14E
12F, 14E
7D9877
BEARING
12F, 14E
12F, 14E
5B1104
BEARING
120B, 12E, 140, 140B
120B, 12E, 140, 140B