BEARING 7M4505 - Caterpillar

Illustration 1 g00500742
(S/N: 9WM1-13571WN1-938) (1) Direction control lever. (2) Speed select switch.
Illustration 2 g00527489
(S/N: 9WM1358-19891WN939-1491) (2) Speed select switch.
Illustration 3 g00500743
(S/N: 9WM1-19891WN1-1491) (3) Creeper speed control.
Illustration 4 g00777300
(S/N: 9WM1990-UP1WN1492-UP) (2) Speed select switch.
Illustration 5 g00752825
(S/N: 9WM1990-UP1WN1492-UP) (3) Creeper speed control.Speed select switch (2) is used to select the SLOW speed mode or the FAST speed mode.If the machine is equipped with a creeper speed control (3), there are two types. See Illustration 3 for machines with serial numbers of (S/N: 9WM1-19891WN1-1491). This creeper control lever can only be used in the slow mode. See Illustration 5. This creeper control lever has full range in slow mode and fast mode.
Illustration 6 g00819025
(4) Direction control switch on the hydraulic controlThe direction control lever (1) beside the steering wheel is used to select the direction of the machine. The directional control switch (4) is also used to select the direction of the machine. The direction control lever (1) must remain in NEUTRAL in order for the directional control switch (4) to function. The accelerator pedal controls the speed of the machine.The hydrostatic system shifts to the NEUTRAL position when the parking brake is engaged. Once the parking brake is released, the direction control lever (1) must be moved to the NEUTRAL position before a direction can be selected.The service connector can be located in one of two locations.
Illustration 7 g00475147
The service connector for the electronic control module is located under the right side of the cab next to the ladder for (S/N: 9WM1990-UP1WN1492-UP).
Illustration 8 g00777310
The service connector for the electronic control module is located at the base of the right console for (S/N: 9WM1358-19891WN939-1491).