7N2213 BEARING-SLEEVE Caterpillar parts
245, 3406, 3406B, 3406C, 3406E, 3408, 365C, 365C L, 365C L MH, 375, 375 L, 385B, 5080, 5090B, 5110B, 578, 583R, 589, C-15, C-16, C15, D10N, D10R, D10T, D10T2, D11R, D11T, D8L, D8N, D8R, D8R II, D9L, D...
Rating:
Alternative (cross code) number:
CA7N2213
7N-2213
7N2213
CA7N2213
7N-2213
7N2213
Weight: 0.03 pounds 0 kg.
Information:
ID
20.439
mm
OD
23.559
mm
WIDTH
19
mm
EXCAVATOR, TRUCK ENGINE,
Related part:
7N2213
BEARING-SLV-YM
3940190
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 7N2213 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP 7N2213 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
$8.02
13 Sep 2023
Amazon.com
CTP 7N2213 Sleeve Bearing for Heavy Equipment
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
CTP Sleeve Bearing Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
For full view, you need register
Information:
Caterpillar: Confidential Yellow
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
This Program must be administered as soon as possible. When reporting the repair, use "PI3656" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T " as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3656" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and " Z" as the SIMS Description Code.
Although this Program is to be administered as described above on the Affected Product, parts should be removed from parts stock as soon as possible.
Completion Date
April 30, 1994Termination Date
October 31, 1994Problem
Moisture may enter past the seal of the 40-pin plug assembly between the main engine harness and the Electronic Control Module (ECM) on certain 3406E Engines. This moisture may cause corrosion on the connector terminals.
Affected Product
Model & Identification Number
3406E (5EK1-456, 5EK461-495, 5EK498-520, 5EK523-525, 5EK527-535, 5EK537-694)
Parts Needed
Dealers will need to order parts for this Program.
2 - 1106844 SealAction Required
See the attached procedure.
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
Parts Stock
Submit one claim for all 3E6285 Seals, 1003450 Inlet Air Temperature Sensors and 1022240 Fuel/Coolant Temperature Sensors removed from parts stock.
US and Canadian Dealers Only - When submitting a parts stock claim use 99Z00007 in the Product Identification Number Field.
Affected Product
This is a 1-hour job.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach.(1-Owner Notification)(2-Rework Procedure)Copy Of Owner Notification For U.S. And Canadian Owners
Rework Procedure
Parts Stock Action
1. Remove all 3E6285 Seals from parts stock.2. Inspect stock of 1003450 Inlet Air Temperature Sensors and 1022240 Fuel/Coolant Temperature Sensors. Remove from parts stock any sensor that does not have a tie wrap around the harness wire between the sensor body and connector.Affected Product
1. Disassemble the 40-pin connectors at P1/J1 and P2/J2 that connect the ECM to the vehicle and engine wiring harnesses.2. Remove the 40 pin connector seal from the vehicle harness connector and the engine harness connector. Use caution when removing the seal. The seal groove must not be scratched.3. The interior mating surfaces of the connectors must be cleaned prior to assembly. Clean these interior mating surfaces (ie. terminals, seals, pins, insulators) with a cotton swab and denatured alcohol. Do not use rubbing alcohol, solvents, or Caterpillar component cleaners 8T9011 or 4C4079 as these will damage certain connector materials. It is important that all corrosion and dirt is removed from the connector mating surfaces. Allow the connectors to dry before plugging them back together.
4. Install the new seals onto the harness connectors being careful to align the corners of the seal with the corners of the connectors.5. Lubricate the new seals with lithium grease before assembling the
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
This Program must be administered as soon as possible. When reporting the repair, use "PI3656" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T " as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3656" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and " Z" as the SIMS Description Code.
Although this Program is to be administered as described above on the Affected Product, parts should be removed from parts stock as soon as possible.
Completion Date
April 30, 1994Termination Date
October 31, 1994Problem
Moisture may enter past the seal of the 40-pin plug assembly between the main engine harness and the Electronic Control Module (ECM) on certain 3406E Engines. This moisture may cause corrosion on the connector terminals.
Affected Product
Model & Identification Number
3406E (5EK1-456, 5EK461-495, 5EK498-520, 5EK523-525, 5EK527-535, 5EK537-694)
Parts Needed
Dealers will need to order parts for this Program.
2 - 1106844 SealAction Required
See the attached procedure.
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
Parts Stock
Submit one claim for all 3E6285 Seals, 1003450 Inlet Air Temperature Sensors and 1022240 Fuel/Coolant Temperature Sensors removed from parts stock.
US and Canadian Dealers Only - When submitting a parts stock claim use 99Z00007 in the Product Identification Number Field.
Affected Product
This is a 1-hour job.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach.(1-Owner Notification)(2-Rework Procedure)Copy Of Owner Notification For U.S. And Canadian Owners
Rework Procedure
Parts Stock Action
1. Remove all 3E6285 Seals from parts stock.2. Inspect stock of 1003450 Inlet Air Temperature Sensors and 1022240 Fuel/Coolant Temperature Sensors. Remove from parts stock any sensor that does not have a tie wrap around the harness wire between the sensor body and connector.Affected Product
1. Disassemble the 40-pin connectors at P1/J1 and P2/J2 that connect the ECM to the vehicle and engine wiring harnesses.2. Remove the 40 pin connector seal from the vehicle harness connector and the engine harness connector. Use caution when removing the seal. The seal groove must not be scratched.3. The interior mating surfaces of the connectors must be cleaned prior to assembly. Clean these interior mating surfaces (ie. terminals, seals, pins, insulators) with a cotton swab and denatured alcohol. Do not use rubbing alcohol, solvents, or Caterpillar component cleaners 8T9011 or 4C4079 as these will damage certain connector materials. It is important that all corrosion and dirt is removed from the connector mating surfaces. Allow the connectors to dry before plugging them back together.
4. Install the new seals onto the harness connectors being careful to align the corners of the seal with the corners of the connectors.5. Lubricate the new seals with lithium grease before assembling the
Cat SIS web machinery list:
Parts bearing Caterpillar catalog:
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D9L
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D9L
D10N, D10R, D10T, D10T2
14G, D9R, D9T
D11R, D11T
844, 844H, 844K, D8L, D9N
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, S365B, VHS-60/3
245, 3406, 3406B, 3406C, 3406E, 3408, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B, 578, 583R, 587R, 589, C-15,...
4N5274
BEARING-SLEEVE
245, 3406, 3406B, 3406C, 3406E, 3408, 3412, 583R, C-15, C-16, D8R
245, 3406, 3406B, 3406C, 3406E, 3408, 3412, 583R, C-15, C-16, D8R
4N5341
BEARING-SLEEVE
245, 3406, 3406B, 3406C, 3406E, 3408, 3412, 583R, C-15, C-16, D8R
245, 3406, 3406B, 3406C, 3406E, 3408, 3412, 583R, C-15, C-16, D8R
215, 3204, 943, 953
3204, 953, D4HTSK II, IT28, IT28B
215, 3204, 931B, 943, 953, D3, D4HTSK II, D5C
3116, 3126
3116, 3126, 3126B, 325D, 330D, C-9, C7, C9, CX31-C9I, PM-102, TH31-E61
2W3633
BEARING-ROLLER
3406B
3406B
3176, 3176B, 3406B, 3406C, 3406E, C-10, C-12
3176, 3176B, 3406B, 3406C, 3406E, C-10, C-12
225, 3208