BEARING (.05" Undersize I.D.) 7N2583 - Caterpillar

UPS View Software
Note: UPS View version 3.0 or later is required for the UPS750.
Illustration 1 g01833414
Typical example of the UPS View screen.
UPS View is an optional software package used for data monitoring. UPS View tracks more than 150 operating parameters of the UPS system in real time. UPS View displays the parameters on a computer display. UPS View gives the user access to a wide range of data.UPS View is compatible with Windows operating systems, and includes capabilities for a remote notification, historical plots, logged events, expandable windows, and system diagnostics.The CIO ships with the same IP address as the UPS. A UPS View connection must be established with the CIO to configure the IP address. A password is required to change the IP address.The menu of the device in UPS View is a password protected section which allows the user to view or configure various parts of the system. With the devices menu, the user can connect to the APC3 or the CIO from either hardware connection (APC3 - port J29 or CIO - port J16).The CIO connection (select CIO from the device menu) is for configuring the CIO IP address if it is to be connected to the network of the customer. The "Connection Settings" is where the password protected modbus settings are located.The APC3 PWA has a RJ45 (J29) connection port with a static IP address. The APC3 is not to be connected to anything other than a direct connection to a laptop. The laptop will need to be given a static IP address to connect to the APC3 service port. This static IP address is different than the APC3 IP address.
Illustration 2 g06021960The UPS View "Connection Setting" window should be configured as follows to connect to the APC3 service port. The IP address and port shown below are not changeable in the APC3.Note: Never use a summary connectionDiagnostic Capabilities
UPS View is used as a diagnostic tool to download the history of events of the UPS. The software can be used to analyze the "Alarm" conditions or the "Notice" conditions. The software also allows the user to cancel paging notification events remotely.UPS View is based on a Client/Server architecture. A UPS View software license includes capabilities of the client/server architecture that enable access via an ethernet connection.Refer to Systems Operation, RENR9558 for more information on UPS View.UPS View gives the user access to a wide range of data, including:
Input/output currents
Input/output voltages
System temperatures
System component states
System event logs, displayed in graphical and text formatUPS View has the following extra capabilities:
Remote notification
Historical plots
Event logging
Expandable windows
System diagnostic aidsUPS View is used as a diagnostic tool to download the UPS event history log remotely or locally. UPS View is also used to analyze "Alarm" or "Notice" conditions. The software allows the user to cancel paging notification events remotely.The following typical input measurements are monitored and displayed by UPS View:
Three-phase line voltage
Three-phase current
Frequency
Total power (kW)
Total kVA
Input power factor
Output power factorThe following is a list of internal system measurements that are monitored and displayed