7P7858 BEARING-SLEEVE Caterpillar parts
517, 561M, 561N, 963, 973, 973C, D3B, D4H, D4H XL, D4HTSK II, D4HTSK III, D5M, D5N, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
Rating:
Alternative (cross code) number:
CA7P7858
7P-7858
7P7858
CA7P7858
7P-7858
7P7858
Weight: 0.80 pounds 0 kg.
Information:
ID
51.055
mm
OD
63.605
mm
WIDTH
50
mm
PIPELAYER, TRACK-TYPE TRACTOR,
Related part:
7P7858
BEARING-SLV-YM
3748362
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
7P7858 Bushing Center Fits CAT D4H XL, D4H LGP
Generic Package included: 1x 7P7858 Bushing Center Fits CAT D4H XL, D4H LGP as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x 7P7858 Bushing Center Fits CAT D4H XL, D4H LGP as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Replacement part for 7P7858 Bushing Center Fits Cat D5M Xl, D5M Lgp, D5N Xl, D5N Lgp R2Aft134506
Generic High-quality spare parts designed for reliable everyday use. || Precision-engineered components that meet strict manufacturing standards. || Versatile design addressing a broad range of repair and maintenance needs. || Durable construction made from quality materials for consistent functionality. || Easy-to-install parts that simplify maintenance and repair processes.
Generic High-quality spare parts designed for reliable everyday use. || Precision-engineered components that meet strict manufacturing standards. || Versatile design addressing a broad range of repair and maintenance needs. || Durable construction made from quality materials for consistent functionality. || Easy-to-install parts that simplify maintenance and repair processes.
7P7858 Bushing Center Fits CAT D5M XL, D5M LGP, D5N XL, D5N LGP
Generic Package included: 1x 7P7858 Bushing Center Fits CAT D5M XL, D5M LGP, D5N XL, D5N LGP as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x 7P7858 Bushing Center Fits CAT D5M XL, D5M LGP, D5N XL, D5N LGP as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 7P7858:
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the correct procedure.
Illustration 1 g01357863
Remove bolts (1) and (3) .
Loosen fitting (4) and remove oil gauge (2) .
Illustration 2 g01357924
Note: Do not pry or gouge the sealing surface of the engine oil pan. Use a rubber mallet to tap lightly on the engine oil pan, if it is necessary.
Remove bolts (6). Remove engine oil pan (5) and the gasket.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01357892
Note: Do not put liquid gasket material on the oil pan gasket or on the gasket surface of engine oil pan (5) .
Position a new gasket and engine oil pan (5) on the cylinder block.
Install bolts (6). Tighten Bolts (x) to a torque of 31 3 N m (23 2 lb ft).
Start at Position (z) and tighten the remaining bolts (6) in a counterclockwise direction. Tighten the remaining bolts (6) to a torque of 31 3 N m (23 2 lb ft).
Start at Position (Z) and tighten bolts (6) again in a counterclockwise direction. Tighten bolts (6) to a torque of 31 3 N m (23 2 lb ft).
Illustration 4 g01357863
Position oil gauge (2) and tighten fitting (4) .
Install bolts (1) and (3) .
Fill the engine with oil to the correct level. Refer to Operation and Maintenance Manual, "Engine Oil - Change" for the correct filling procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual for the correct procedure.
Illustration 1 g01357863
Remove bolts (1) and (3) .
Loosen fitting (4) and remove oil gauge (2) .
Illustration 2 g01357924
Note: Do not pry or gouge the sealing surface of the engine oil pan. Use a rubber mallet to tap lightly on the engine oil pan, if it is necessary.
Remove bolts (6). Remove engine oil pan (5) and the gasket.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01357892
Note: Do not put liquid gasket material on the oil pan gasket or on the gasket surface of engine oil pan (5) .
Position a new gasket and engine oil pan (5) on the cylinder block.
Install bolts (6). Tighten Bolts (x) to a torque of 31 3 N m (23 2 lb ft).
Start at Position (z) and tighten the remaining bolts (6) in a counterclockwise direction. Tighten the remaining bolts (6) to a torque of 31 3 N m (23 2 lb ft).
Start at Position (Z) and tighten bolts (6) again in a counterclockwise direction. Tighten bolts (6) to a torque of 31 3 N m (23 2 lb ft).
Illustration 4 g01357863
Position oil gauge (2) and tighten fitting (4) .
Install bolts (1) and (3) .
Fill the engine with oil to the correct level. Refer to Operation and Maintenance Manual, "Engine Oil - Change" for the correct filling procedure.
Cat SIS web machinery list:
Parts bearing Caterpillar catalog:
518, 613, 613B, 920, 930, 936, 936F, 941, 950, 955H, 966C, D4D, D4E, D4H, D4HTSK II, G936
571G, 816, 824S, 826B, 920, 930, 933, 941, 950, 951B, 955C, 955H, 955K, 955L, 977D, 977H, D4HTSK II, D4HTSK III, D5HTSK II
517, 527, 977K, 980B, D4HTSK II, D4HTSK III, D5HTSK II
931B, D3B, D4D
24H, 24M, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 931B, 980C, 980F, 980F II, 980G, 980G II, 980H, 98...
973
24H, 24M, D4H
931B, D3B
973, D7H
143H, 163H, 163H NA, 527, 834K, 836K, 988K, D5N, D6R, D6T
517, 525, 525B, 527, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, D11N, D11R, D11T, D35C, D35HP, D44B, D550B
2213201
BEARING-SLEEVE
973C, 973D
973C, 973D
973C, 973D, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP
120K, 120M, 120M 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14E, 14G, 14H, 14H...
D5H XL, D5R LGP, D6M, D6N, D6N LGP, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
7A, 7S, D5H XL, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6M, D6N, D6N LGP, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL, D7E, D7E LGP, D7G, D7G2
320D, 324D L, 325B L, 325C, 325D L, 329D L, 973, 973C, 973D, D7E, D7E LGP
973, 973C, 973D
973, 973C, 973D, 977K, 977L
1P8786
BEARING AS
973C, 973D, D7R, D7R II
973C, 973D, D7R, D7R II
973, 973C
973, 973C, 973D