BEARING KIT 7X0786 - Caterpillar

Adjustment Procedure
Table 1
Required Tools    
Tool     Part Number     Description     QTY    
A     195-3446     Socket Wrench As     1    
B     1U-6690     Socket Wrench As     1    
C     6V-7820     Torque Multiplier Gp     1    For brake drums that are secured with one nut and a lock plate, continue with the Steps that are in "Single Nut Design". For brake drums that are secured with two nuts and a lock ring, continue with the Steps that are in "Double Nut Design".Single Nut Design
Illustration 1 g00724724
Install wheel bearing adjusting nut (1) .
Perform the following procedure in order to adjust the wheel bearings:
Use Tool (A) to tighten the wheel bearing adjusting nut to the following torque in order to seat the wheel bearings: 542 N m (400 lb ft)Note: The hub must be rotated in both directions while the wheel bearing adjusting nut is tightened.
Rap the hub several times with a soft faced hammer. Then use Tool (A) in order to tighten the wheel bearing adjusting nut to the following torque: 542 N m (400 lb ft)
Loosen the wheel bearing adjusting nut in order to relieve the preload on the wheel bearings. The wheel bearing adjusting nut should have a torque of 0 N m (0 lb ft).
Determine the rolling torque of the