BEARING GP-SHAFT 7X4249 - Caterpillar

Illustration 57 g03408448Illustration 57 shows the view that appears on the display when the configure screen is accessed for the first time. The "Change Settings" box will be located opposite the "OK" button to indicate the purpose of the button. The "Change Screens" box will be located opposite the tab button to indicate the purpose of the button.Configure Parameters
The following list of parameters can be configured when the "Change View" screen is accessed.
Illustration 58 g03408477Display consists of language selection and brightness selection. Refer to Illustration 58
Illustration 59 g03408526
System Information Screen
System Information provides the following information:
Machine Model
Product ID
Software Version
OS Version
SW Release Date
Unit Serial Number
Hardware P/N
System Hardware Description
Illustration 60 g03408536
Settings Selection Screen
The settings selection screen has two selections that can be selected:
Auto Dim
Alarm ModeThe "Auto Dim" can be Enabled or Disabled. The "Alarm Mode" can be set to be continuous or discrete.
Illustration 61 g03408552
Diagnostics Selection Screen
Illustration 62 g03408558
Diagnostics Signal Page
Illustration 63 g03408581
Diagnostics Detail Screen
In the display screen, language is an option. To change the language, select "Language". Refer to illustration 58.
Illustration 64 g03408478
Language Screen
The display supports the following list of languages:
English
French
Indonesian
Portuguese
SpanishRefer to Illustration 64.
Illustration 65 g03408468
Setting Selection Screen
Under the setting screen, select "Auto Dim". Refer to Illustration 65. The auto dim feature will reduce the display and video brightness by one third of the current brightness setting. When night mode is selected, the system will stop providing video and the entire screen will be dimmed.
Illustration 66 g03408480Auto dimming can be either "Enabled" or "Disabled". Refer to Illustration 66.
Illustration 67 g03408469Under the setting screen, select "Alarm Mode". Refer to Illustration 65 The "Object Detection Alarm Mode" parameter configures the audible alarm mode. The alarm mode will be "Continuous" by default. "Discrete" alarming can be selected to reduce the length of audible alarming.Note: This parameter is only adjustable when the Cat ® Electronic Technician (Cat ET) is connected and communicating with the system.