BEARING AS-ROLLER 7Y0252 - Caterpillar

Illustration 1 g02724344
Top view
Table 1
Specification for 175-3860 Oil Pan Gp
Item Qty Part Specification Description
1 2 353-5065 Oil Pan Gasket Apply ultra blue Loctite blue RTV silicone sealant on the top across the entire length of joints of the oil pan gasket.
2 1 4P-0519 Drain Adapter Torque to 70 15 N m (52 11 lb ft).
3 1 319-6234 Plug As Torque to 90 15 N m (66 11 lb ft).
Illustration 2 g02634676
Table 2
Specification for 175-3860 Oil Pan Gp
Item Qty Part Specification Description
- - - Use the following procedure during assembly of engine oil pan:
- - - The sealing surfaces of the oil pan shall be free of oil, debris, gasket material, or any other sealant.
- - - The oil pan must be assembled and tightened to the cylinder block within 10 minutes of applying sealant.
- - - 1. Apply 3 to 5 mm (0.1 to 0.2 inch) ultra blue Loctite blue RTV silicone sealant to the following locations:
Connecting joint of the front housing and the front of the cylinder block.
Connecting joint of the flywheel housing and the rear of the cylinder block.
Apply bead of sealant to the gasket or to the housing face. At the T-joint location the bead should cover the entire span.
4 40 2P-3205 Bolt 2. Tighten bolt 1 through bolt 40 in the numerical sequence as shown in Illustration 2 to 40 5 N m (30 4 lb ft).
3. Again, tighten bolt 1 through bolt 40 in the numerical sequence as shown in Illustration 2 to 47 5 N m (35 4 lb ft).