8E2058 BEARING Caterpillar parts
235C, 235D
Rating:
Alternative (cross code) number:
CA8E2058
8E-2058
8E2058
CA8E2058
8E-2058
8E2058
Weight: 20 pounds 9 kg.
Information:
ID
101.777
mm
INNER BEARING LENGTH
107.885
mm
OD
168.27
mm
OUTER RACE LENGTH
80.885
mm
EXCAVATOR,
Related part:
8E2058
BEARING-YM
3845949
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$182.13
03 Mar 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Bearing 8E2058 New
29 Jun 2018
2125 Hundredths Pounds
CTP: CTP
Caterpillar BEARING (8E2058) New Aftermarket By CTP
8E2058 Weight(lbs): 21.20 Length(cm): 21.0000 Width(cm): 18.4000 Depth(cm): 12.1000
8E2058 Weight(lbs): 21.20 Length(cm): 21.0000 Width(cm): 18.4000 Depth(cm): 12.1000
13 Nov 2019
-: -
8E2058 - BEARING fits Caterpillar (CAT)
8E2058 Bearing
8E2058 Bearing
Number on catalog scheme:
24
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1 Start By:
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Remove the air compressor, if necessary. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Remove the water pump, if necessary. Refer to Disassembly and Assembly, "Water Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Note: Be sure to mark the orientation of each of the gears for installation purposes.
Illustration 1 g01008429
Remove bolts (2) and thrust plate (1).
Illustration 2 g01008430
Remove sealing plate (3) and adapter (4).
Illustration 3 g01008431
Remove O-ring seal (5) and O-ring seal (6) from sealing plate (3).
Illustration 4 g01101536
Remove bolts (8), plate (9), and adjustable idler gear assembly (7).
Use Tooling (A) and remove the sleeve bearing from adjustable idler gear assembly (7).
Illustration 5 g01101045
Remove bolts (11), plate (12), and idler gear assembly (10).
Use Tooling (A) and remove the sleeve bearing from idler gear assembly (10).
Illustration 6 g01101048
Remove bolts (14), plate (15), and cluster gear assembly (13).
Use Tooling (A) and remove the sleeve bearing from cluster gear assembly (13).
Illustration 7 g01101050Note: Stub shaft assembly (16) must be removed in order to remove plate (22). The backlash for the camshaft gear and the adjustable idler gear assembly will need to be readjusted at assembly.
Remove nuts (17) and remove stub shaft assembly (16). Note: Stub shaft (18) must be removed in order to remove plate (22).
Remove nuts (19) and remove stub shaft (18).
Remove bolts (21) and remove stub shaft (20).
Remove bolts (23) that hold plate (22) to the cylinder block. Remove plate (22).
If studs (24) are loose or the threads are damaged, remove the studs from the front plate.
Illustration 8 g01101052
Remove integral seal (25) from the cylinder block.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1 Start By:
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Remove the air compressor, if necessary. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Remove the water pump, if necessary. Refer to Disassembly and Assembly, "Water Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Note: Be sure to mark the orientation of each of the gears for installation purposes.
Illustration 1 g01008429
Remove bolts (2) and thrust plate (1).
Illustration 2 g01008430
Remove sealing plate (3) and adapter (4).
Illustration 3 g01008431
Remove O-ring seal (5) and O-ring seal (6) from sealing plate (3).
Illustration 4 g01101536
Remove bolts (8), plate (9), and adjustable idler gear assembly (7).
Use Tooling (A) and remove the sleeve bearing from adjustable idler gear assembly (7).
Illustration 5 g01101045
Remove bolts (11), plate (12), and idler gear assembly (10).
Use Tooling (A) and remove the sleeve bearing from idler gear assembly (10).
Illustration 6 g01101048
Remove bolts (14), plate (15), and cluster gear assembly (13).
Use Tooling (A) and remove the sleeve bearing from cluster gear assembly (13).
Illustration 7 g01101050Note: Stub shaft assembly (16) must be removed in order to remove plate (22). The backlash for the camshaft gear and the adjustable idler gear assembly will need to be readjusted at assembly.
Remove nuts (17) and remove stub shaft assembly (16). Note: Stub shaft (18) must be removed in order to remove plate (22).
Remove nuts (19) and remove stub shaft (18).
Remove bolts (21) and remove stub shaft (20).
Remove bolts (23) that hold plate (22) to the cylinder block. Remove plate (22).
If studs (24) are loose or the threads are damaged, remove the studs from the front plate.
Illustration 8 g01101052
Remove integral seal (25) from the cylinder block.
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
143H, 14G, 1673C, 16G, 16H NA, 235, 235C, 3176B, 3208, 330, 330 L, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3412E, 350, 375, 375 L, 5080, 572G, 578, 583R, 589, 615C, 621R, 627E, 627F...
215, 215B, 215C, 215D, 225, 225D, 227, 229, 229D, 235, 235C
225, 227, 229, 229D, 231D, 235, 235B, 235C
14G, 16G, 225, 227, 235D, 245, 245B, 245D, 943
235, 235B, 235C, D10R, D10T, D10T2, D9L
235, 235B, 235C, 245, 245B, 784B, 785
235C, 245, 245B, 245D, 789
227, 229, 235, 235C, 571G, 572G, 572R II, 973, 973C, 973D, 977K, 977L, D7E, D7E LGP, D7F, D7G, D7R II, D7R XR
231D, 235D, 245, 943, 953, 953B, 963, 963B, 973
225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 578, 994, 994D, 994F, 994H
231D, 235D, 651, 657, 657B, 666, 768B, 769, 772, 834, 973, 992, D9R, D9T
235, 235B, 235C, 235D, 5110B
8R6402
BEARING-SLEEVE
229D, 231D
229D, 231D
8R6401
BEARING
225D, 229D, 231D
225D, 229D, 231D
4E6378
BEARING-SLEEVE
235C, 235D
235C, 235D
6E1692
BEARING AS
229D, 231D, 5130, 5130B, 5230, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 844, 854G, 914G, 939C, 990, 990 II, 992G, D4C III, D5C III, IT14G, IT14G2, PL61
229D, 231D, 5130, 5130B, 5230, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 844, 854G, 914G, 939C, 990, 990 II, 992G, D4C III, D5C III, IT14G, IT14G2, PL61
6E1691
BEARING AS
229D, 231D, 5130, 5130B, 5230, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 844, 854G, 914G, 939C, 990, 990 II, 992G, D4C III, D5C III, IT14G, IT14G2, PL61
229D, 231D, 5130, 5130B, 5230, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 844, 854G, 914G, 939C, 990, 990 II, 992G, D4C III, D5C III, IT14G, IT14G2, PL61
6C3511
BEARING
215C
215C
227, 229, 235