BEARING 8J1057 - Caterpillar

Drain the engine coolant into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities".
Drain the hydraulic fluid into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities".
Open the rear door.
Illustration 1 g01153974
Disconnect hose assembly (1) .
Illustration 2 g01153975
Remove clips (2) .
Illustration 3 g01153977
Remove bolts (4) from both sides of refrigerant condenser (3). Place refrigerant condenser (3) aside.
Open the engine hood.
Illustration 4 g01155998
Remove panel (5) .
Illustration 5 g01153980
Remove tube (6) .
Illustration 6 g01153983
Remove oil fill cap (7) and grommet (8) .
Remove oil dipstick (9) and grommet (10) .
Illustration 7 g03397997
Remove tube (11) .
Illustration 8 g03398002
Disconnect tube (12) .
Illustration 9 g03398007
Disconnect hose assembly (13) .
Illustration 10 g03398010
Disconnect hose assembly (14) .
Illustration 11 g03398014
Disconnect hose (15) .
Illustration 12 g03398022
Remove tube (16) .
Illustration 13 g03398024
Attach the suitable lifting device to cooling package (17). The weight of cooling package (17) is approximately 408 kg (900 lb).
Illustration 14 g03398025
Remove bolts (18) from both sides of cooling package (17) .
Use Tooling (A) and a suitable lifting device to remove cooling package (17). The weight of cooling package (17) is approximately 408 kg (900 lb).Installation Procedure
Install cooling package (17) in the reverse order of removal.