8J4411 BEARING ASSEM. Caterpillar parts
215, 215B, 215C, 215D, 225, 225D, 227, 229, 229D, 235, 235C
Rating:
Alternative (cross code) number:
CA8J4411
8J-4411
8J4411
CA8J4411
8J-4411
8J4411
Weight: 9 pounds 4 kg.
Information:
ID
76.25
mm
INNER BEARING LENGTH
82.55
mm
OD
130.175
mm
OUTER RACE LENGTH
61.8
mm
EXCAVATOR, LOGGER,
Related part:
8J4411
BEARING-YM
3844815
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 8J4411 Spherical Bearing for Heavy Equipment
CTP Spherical Bearing Only || Sold in each || Easy in-and-out fit
CTP Spherical Bearing Only || Sold in each || Easy in-and-out fit
Replacement for fits 8J4411 Bearing Fits Caterpillar ENB10-0095
shloju
shloju
8J4411 Spherical Bearing (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 11.22 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 11.22 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 8J4411:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 256-0302 Bolt 1 Start By:
Remove the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Remove".Note: Tooling (A) is required for replacement of the fuel transfer pump.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01123057
Mount the unit injector hydraulic pump in a vertical position on a work bench.Note: Failure to maintain a vertical position results in misalignment of the internal components.
Remove bolts (3).
Remove tie bolt (1) that is located in the top left corner of the pump first.
Replace tie bolt (1) with Tooling (A).Note: Tooling (A) has an undersized bolt head. Tooling (A) will prevent the body of the unit injector hydraulic pump from separating during service.
Tighten Tooling (A) to a torque of 10 N m (89 lb in).
Start with tie bolt (4) in the lower left corner and remove the remainder of the bolts from fuel transfer pump (2).
Remove fuel transfer pump (2).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 256-0302 Bolt 1 Start By:
Remove the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Remove".Note: Tooling (A) is required for replacement of the fuel transfer pump.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01123057
Mount the unit injector hydraulic pump in a vertical position on a work bench.Note: Failure to maintain a vertical position results in misalignment of the internal components.
Remove bolts (3).
Remove tie bolt (1) that is located in the top left corner of the pump first.
Replace tie bolt (1) with Tooling (A).Note: Tooling (A) has an undersized bolt head. Tooling (A) will prevent the body of the unit injector hydraulic pump from separating during service.
Tighten Tooling (A) to a torque of 10 N m (89 lb in).
Start with tie bolt (4) in the lower left corner and remove the remainder of the bolts from fuel transfer pump (2).
Remove fuel transfer pump (2).
Cat SIS web machinery list:
Parts bearing Caterpillar catalog:
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 539, E300B, M325B
225D, 229D, 231D
225D, 229D
215C, 215D
215D, 219D
231D, 235C, 235D
235C, 235D
235C, 235D, 245B, D6H, D6H XL, D6H XR, D6R
235, 235B, 235C, 235D, 5110B
1183837
BEARING
315B, 933, 933C, D3C III, D4C III, D5C III
315B, 933, 933C, D3C III, D4C III, D5C III
3989799
BEARING AS
305.5E
305.5E
235B, 572R, D7H, D7R
4220715
BEARING-CUSHION
303E CR
303E CR
4397550
BEARING
303E CR
303E CR
4397549
BEARING
303E CR
303E CR
8K1200
BEARING
215, 225, 235, 245
215, 225, 235, 245
2P3186
BEARING
215, 225, 235, 245, 941, D4D
215, 225, 235, 245, 941, D4D
8K0321
BEARING
225
225
8J2067
BEARING
14G, 16G, 225, 245
14G, 16G, 225, 245
8J0477
BEARING
225
225
120G, 12G, 140G, 16G, 613C, 631E, 651E, 657E, 773, 777B, 815B, 824B, 950B, 951B, 988B, 992C