BEARING 9C6029 - Caterpillar

Cross-Reference Information for Event Codes
Table 1 is a list of the event codes for the engine. The event codes are cross-referenced with the appropriate troubleshooting procedure that can be used to troubleshoot the code.Event codes are generated when abnormal operating conditions exist. A further explanation of event codes and the engines monitoring system are described after Table 1.Portions of this material are reprinted with permission from SAE J1939DA_201607© 2016 SAE International. SAE International is not responsible for any use or translation of this material, in whole or in part. Please contact SAE International to obtain a complete copy of SAE J1939DA_201607, the official definitive source of this standard.
Table 1
Cross-Reference from Event Codes on Cat Data Link to J1939 Code to Troubleshooting Procedure
Code and Description J1939 Code Troubleshooting Procedure
E073(1) High Oil Filter Differential Pressure 99-15 Troubleshooting, "Oil Pressure Is Low"
E073(2) High Oil Filter Differential Pressure 99-16
E073(3) High Oil Filter Differential Pressure 99-0
E198(1) Low Fuel Pressure (1) Troubleshooting, "Fuel Filter Is Restricted"
E198(2) Low Fuel Pressure (1)
E199(1) Low Coolant Temperature (1) Troubleshooting, "Coolant Temperature Is Low"
E199(2) Low Coolant Temperature (1)
E199(3) Low Coolant Temperature (1)
E360(1) Low Engine Oil Pressure 100-17 Troubleshooting, "Oil Pressure Is Low"
E360(2) Low Engine Oil Pressure 100-18
E360(3) Low Engine Oil Pressure 100-1
E361(1) High Engine Coolant Temperature 110-15 Troubleshooting, "Coolant Temperature Is High"
E361(2) High Engine Coolant Temperature 110-16
E361(3) High Engine Coolant Temperature 110-00
E362(1) Engine Overspeed 190-15 Troubleshooting, "Engine Overspeeds"
E362(3) High Exhaust Temperature 190-00
E390(1) Fuel Filter Restriction 95-15 Troubleshooting, "Fuel Filter Is Restricted"
E390(2) Fuel Filter Restriction 95-16
E390(3) Fuel Filter Restriction 95-00
E539(1) High Intake Manifold Air Temperature 105-15 Troubleshooting, "Intake Manifold Air Temperature Is High"
E539(2) High Intake Manifold Air Temperature 105-16
E539(3) High Intake Manifold Air Temperature 105-00
E1036(1) High Crankcase Pressure 101-15 Troubleshooting, "Crankcase Pressure Is High"
E1036(2) High Crankcase Pressure 101-16
E1036(3) High Crankcase Pressure 101-00
E1218(2) High Unfiltered Fuel Pressure (1) Troubleshooting, "Fuel Filter Is Restricted"
(1) No SPN-FMI Codes are available at this time.Active Event Codes
An active event code represents a problem with engine operation. Correct the problem as soon as possible.Active event codes are listed in ascending numerical order. The code with the lowest number is listed first.Illustration 1 is an example of the operating range of a temperature sensor. Do not use the Illustration to troubleshoot temperature sensors.
Illustration 1 g01138880
Example of the typical operating range of a temperature sensor
(1) This area represents the normal operating range of the parameter. The normal output voltage of the sensor is between 0.2 VDC and 4.2 VDC.
(2) In this area, the temperature above 107 °C (225 °F) is higher than normal. The output voltage of the sensor will generate an event code. The sensor does not have an electronic problem.
(3) In these areas, the output voltage of the sensor is too high or too low. The voltage is outside of the normal range. The electronic problem will generate a diagnostic code. Refer to Troubleshooting, "Diagnostic Code List" for additional information on diagnostic codes.Event Code - The "E" identifies the code as an event code. The "XXX(X)" represents a numeric identifier for the event code. The fourth "(X)" identifies