BEARING-SLEEVE 9G1331 - Caterpillar

The upgrade procedure returns the AccuGrade system settings to factory defaults. Ensure that you save your settings before you start to upgrade the firmware.
Display Firmware - Upgrade Procedure
Required Equipment
You need the following equipment in order to upgrade your Display firmware and then enable the option keys.
The display and your power supply
The display firmware upgrade file from SISWeb
A data card
A PC card adapter
A PC that can communicate with the data card.Before Starting the Upgrade
Before you start, ensure that you save your machine settings to a file and make a permanent paper record of the system settings for the machine.Perform the following steps in order to save the display settings and the machine settings:
Press and hold down the "OK" key while powering on the display in order to enter service mode.
In the "Setup Menu - Configuration" dialog, select the "Save Settings" option.
Select "Machine Settings".Change the name of the file in order to make the name unique for that machine.Note: The serial number for the machine may be used.Upgrading the Display Firmware
Do the following in order to upgrade the display firmware.
Obtain the latest firmware file from the "Downloads" page of SIS Web.
Copy the ".SG2" file and ".bin" files (if required) to the root directory of the data card.
Update the firmware for the display.
Update the option keys, if required
Restore the display settings.
Restore the machine settings.Copying the Files to the Data Card
Use an office PC in order to copy the appropriate AccuGrade display file that was obtained from SISWeb to the root directory of the data card.
Turn off the display.
Insert the data card into the display.
Press the power key in order to turn on the display.Note: Do not turn off the display until Step 7.If ".bin" files are required, you will be prompted to update each of the files. Press the "OK" key in order to upgrade each ".bin" file.The display detects all ".SG2" files and lists the files on the "Select Display Software File for Upgrade" screen.
Use the up arrow key and the down arrow key in order to select the file you want to upgrade to. Press the "OK" key in order to continue.
The "Update Display Software - New Version Detected" confirmation screen will appear. Press the "OK" key in order to start the upgrade process. Press the "ESC" key in order to cancel the upgrade.Stage one of the firmware upgrade starts automatically. The firmware upgrade is copied into the temporary memory.Stage two then starts automatically. The upgrade firmware is verified in internal memory, and the temporary memory is erased.
When you are prompted, press the "OK" key.Upgrading the Option Keys (If Required)
Enter the "Setup Menu - Configuration, Software Support" option to see if the option key has expired. Refer to Systems Operation, "Display Registration and Activation" if the option key has expired.Restore the Machine Settings
With the display in service mode, select "Restore Settings" from the "Setup menu - Configuration" dialog.
Check all AccuGrade system settings.
Select the desired machine settings file, press the "OK" key.The display automatically uses the new firmware.After Upgrading
On a