9N5924 BEARING-CONNECTING ROD Caterpillar parts
3208
Rating:
Alternative (cross code) number:
CA9N5924
9N-5924
9N5924
CA9N5924
9N-5924
9N5924
Weight: 0.30 pounds 0 kg.
MARINE ENGINE,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
$15.49
05 Jul 2022
0.3968[0.18] Pounds
US: ProperBuy
9N5924 Bearing Engine 0.010in US Fits Caterpillar
TCP Warranty
TCP Warranty
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 9N5924:
Caterpillar parts catalog:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06133643
Place clean engine oil on the O-rings. Install Tool (A) and attach a suitable lifting device to engine oil pump (10).The weight of the engine oil pump is approximately 39 kg (86 lb).
Ensure that the splines on the shaft of engine oil pump (10) are correctly engaged with the splines of the engine oil pump drive gear. Install bolts (11).
Illustration 2 g06133620
Position the flange and tube (9) on the engine cooler bonnet.
Position the elbow (7) and tube (6) and install 4 bolts (8).
Illustration 3 g06133608
Position bracket (5) and adapter (4) and install bolts (1), (2), and (3).
Fill the cooling system to the correct level with coolant. Refer to theOperation and Maintenance Manual for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06133643
Place clean engine oil on the O-rings. Install Tool (A) and attach a suitable lifting device to engine oil pump (10).The weight of the engine oil pump is approximately 39 kg (86 lb).
Ensure that the splines on the shaft of engine oil pump (10) are correctly engaged with the splines of the engine oil pump drive gear. Install bolts (11).
Illustration 2 g06133620
Position the flange and tube (9) on the engine cooler bonnet.
Position the elbow (7) and tube (6) and install 4 bolts (8).
Illustration 3 g06133608
Position bracket (5) and adapter (4) and install bolts (1), (2), and (3).
Fill the cooling system to the correct level with coolant. Refer to theOperation and Maintenance Manual for the correct procedure.
Parts bearing Caterpillar catalog:
1140, 1160, 120, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2,...
3114, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 3412D, 3412E, 446B, 446D, C-12, C15, C18, CB-614, CS-551, G3304, G3304...
3208, 613C, PR-1000, PS-500
215, 3204, 3208, 613C, 926, 931B, 943, CS-551, D4HTSK II, E180, FB221, PR-1000, PS-500
227, 3208, 613C, CS-551, PR-1000, PS-500
225, 227, 3208, 613B, 613C, FB221, PR-1000, PS-500
225, 227, 3208, 613B, 613C, FB221, PR-1000, PS-500
225, 227, 3208, 613B, 613C, FB221, PR-1000, PS-500
215, 225, 227, 3204, 3208, 613B, 613C, 931B, 943, 953, D3, D4HTSK II, D5C, PR-1000, PS-500
225, 3208, 613B, 613C, CS-551, FB221, PR-1000, PS-500
1673C, 225, 3208, CB-614, CS-551, PS-500
120G, 12G, 130G, 140G, 1673C, 215, 225, 3208, 3304, 3306, 518, 613B, 613C, 637D, 920, 941, 950, 955L, 980B, CB-614, CS-551, D4D, D5, D5B, D6D, PR-1000, PS-500
9F6432
BEARING
D337, D343
D337, D343
8F5821
BEARING
D364
D364
