BEARING 9S4540 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0520     Driver Gp     1    
B     289-2838     Spanner     1    
289-2846 Spline Wrench     1    
C     5B-4274     Bolt     3    
5M-2894 Hard Washer     3    
9S-8752 Full Nut     3    
D     -     Flat Stock Steel
1/16 - 3/4 by 8     2    Start By:
Remove the pump drive. Refer to Disassembly and Assembly, " Pump Drive - Remove".
Illustration 1 g01231868
Remove bolts (1) and (3) . Remove manifold (2) .
Illustration 2 g01231869
Use Tooling (A) in order to remove race (4) from manifold (2) .
Illustration 3 g01231871
Remove carrier assembly (6) from manifold (5) .
Illustration 4 g01231872
Remove O-ring seals (7) .
Illustration 5 g01231873
Remove seal (8) .
Illustration 6 g01231874
Remove retaining ring (9) , bearing (10) , and gear (11) .
Illustration 7 g01354737
Remove bearing cups (12) and (13) from gear (11) .
Illustration 8 g01354874
Remove bearing cone (14) from carrier (15) .
Illustration 9 g01354881
Illustration 10 g01354888
Release lock (16) . Use Tooling (B) in order to remove nut (17) . Reposition manifold (5) . Install Tooling (C) and Tooling (D) . Use Tooling (C) and (D) to remove gear (19) . Remove bearing cone (18) .
Illustration 11 g01354899
Remove bearing cone (20) from gear (19) .
Illustration 12 g01354903
Remove bearing cups (21) and (22) .