BEARING-SLEEVE 9W4194 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    
B     1P-2420     Transmission Repair Stand     1    Start By:
Separate the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Separate".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01435451
Attach Tooling (A) to torque converter (1) .
Illustration 2 g01435396
Remove bolts (2) .
Illustration 3 g01435467
Remove bolts (3) .
Illustration 4 g01435451
Illustration 5 g01435473
Raise torque converter (1) in order to remove transfer gears (4). The weight of torque converter (1) is approximately 532 kg (1173 lb). Place torque converter (1) onto Tooling (B) (not shown).