4P7855 BELL AS Caterpillar parts
3406B, 3406C, 3406E, C-15, C-16, C15
Rating:
Alternative (cross code) number:
CA4P7855
4P-7855
4P7855
CA4P7855
4P-7855
4P7855
Weight: 1 pounds 0 kg.
TRUCK ENGINE,
Number on catalog scheme:
16
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3095 Puller Handle 1
B 6V-4194
(1) Valve Seat Extractor 1
1U-9167
(2) Valve Seat Extractor 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve SeatStart By:
Remove inlet and exhaust valves.
Illustration 1 g01137634
Use Tooling (A) and Tooling (B) to remove valve seat inserts (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 4C-6372(1) Valve Seat Driver 1
364-4009(2) Valve Seat Driver 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve Seat
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137637Note: Do not machine the prefinished valve seat inserts in order to correct the valve stem projection. An excessive valve stem projection indicates that the valve seat insert is not seated or material was not cleaned from the bottom of the counterbore.
Lower the temperature of new valve seat inserts (1). Use Tooling (C) to install valve seat inserts (1) into the cylinder head. End By:
Install the inlet and exhaust valves.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3095 Puller Handle 1
B 6V-4194
(1) Valve Seat Extractor 1
1U-9167
(2) Valve Seat Extractor 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve SeatStart By:
Remove inlet and exhaust valves.
Illustration 1 g01137634
Use Tooling (A) and Tooling (B) to remove valve seat inserts (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 4C-6372(1) Valve Seat Driver 1
364-4009(2) Valve Seat Driver 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve Seat
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137637Note: Do not machine the prefinished valve seat inserts in order to correct the valve stem projection. An excessive valve stem projection indicates that the valve seat insert is not seated or material was not cleaned from the bottom of the counterbore.
Lower the temperature of new valve seat inserts (1). Use Tooling (C) to install valve seat inserts (1) into the cylinder head. End By:
Install the inlet and exhaust valves.
Caterpillar parts catalog:
Parts bell Caterpillar catalog:
16G, 245B, 24H, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 365C, 365C L, 365C L MH, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 5080, 5090B, 5110B, ...
3406, 3406B, 3406C, 3406E, 3408, C-15, C-16, C15
7E9409
BELL AS
3406B, 3406E, 375
3406B, 3406E, 375
4P8205
BELL AS-SUCTION
3176, 3176B
3176, 3176B
4P5282
BELL AS
3176
3176
9N6630
BELL AS
3208, FB221, PR-1000
3208, FB221, PR-1000
C11, C13, CX31-C13I, R1600H, R1700G, TH35-C11I, TH35-C13I, TH35-C13T
3503117
BELL AS-SUCTION
349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, C11, C13, CX31-C13I
349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, C11, C13, CX31-C13I
140H, 143H, 14H, 160H, 163H, 16H, 3176C, 3196, C-10, C-12
3176C, 3196, C-10, C-12
3176C, 3196, 725, 730, C-10, C-12, C13
7E9409
BELL AS
3406B, 3406E, 375
3406B, 3406E, 375