BELL HOUSING 7R1757 - Caterpillar

2. Loosen two bolts (1).3. Remove four bolts (2) and washers.4. Disconnect ether starting aid line (3).5. Remove two bolts (7) (only one shown) and P-clamps that hold the ether starting aid line to manifold (6).6. Remove two bolts (4) and washers. Reposition wiring bracket (5). 7. Loosen two hose clamps (8). Remove hose (9) and tube (10) from the inner cooler tube. 8. Disconnect fuel ratio control air line (12).9. Remove twelve bolts (11) and washers.10. Remove manifold (6) and six gaskets. Check gaskets for wear or damage. Replace if necessary. For installation of the manifold-inlet, reverse the removal steps.