BELLOWS ASSEM. 2H0560 - Caterpillar

Removal Procedure
Ensure that the engine is stopped before any servicing or repair is performed.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Cat Dealer Service Tool Catalog" or refer to Special Publication, PECJ0003, "Cat Shop Supplies and Tools Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Remove the heat shielding.
Illustration 1 g06232346
Remove bolts (1) and plate (2).
Illustration 2 g06232384
Remove cable straps (5) and bolt (4).
Disconnect wiring harness (3) and position it out of the way.
Remove temperature sensor (6).Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite Marine Grade Anti-Seize -
Install temperature sensor (6) in the reverse order of removal.
Apply Tooling (A) to the threads of temperature sensor (6).
Tighten temperature sensor (6) to a torque of 45 5 N m (398 44 lb in).