BELLOWS 7L8240 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Fuel System - Prime
Maintenance Recommendations
Daily
Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel Filter Differential Pressure - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Walk-Around Inspection
Every 250 Service Hours
Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Fuel Injector - Inspect/Adjust
Initial 500 Service Hours (or at first oil change)
Speed Sensor - Clean/Inspect
Every 1000 Service Hours or Every 92 Day FRA Inspection
Engine Crankcase Breather - Clean
Engine Oil and Filter - Change
Engine Protective Devices - Check
Fuel System Primary Filter/Water Separator - Clean/Replace
Fuel System Secondary Filter - Replace
Initial 1500 Service Hours
Flexible Coupling Oil - Change
Every 2000 Service Hours or Every 184 Day FRA Inspection
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine - Clean
Engine Mounts - Inspect
Every 3000 Service Hours
Coolant (DEAC) - Change
Coolant Extender (ELC) - Add
Flexible Coupling Oil - Change
Hoses and Clamps - Inspect/Replace
Every Year
Coolant Sample (Level 2) - Obtain
Every 4000 Service Hours or Every Yearly FRA Inspection
Engine Valve Lash - Check
Fuel Injector - Inspect/Adjust
Starting Motor - Inspect
Every 6000 Service Hours
Coolant (ELC) - Change
Coolant Temperature Regulator - Replace
Speed Sensor - Clean/Inspect
Every 8000 Service Hours or Every 2 Year FRA Inspection
Turbocharger - Inspect
Water Pump - Inspect
Every 12 000 Service Hours or 6 Years
Flexible Coupling - Inspect
Overhaul
Aftercooler Core - Inspect/Clean/Test
Maintenance Recommendations
Overhaul (In-Frame)
Overhaul (Top End)
Overhaul (Major)